Sony CMT-F3MD Operating Instructions Manual page 36

Labelling an MD (continued)
Tip
In step 3 you can enter a space directly by pressing
SPACE without selecting
Copying a disc or track title
You can copy a labeled disc or track title to use it
as a title of another track or the disc title within a
disc.
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until "Name ?"
appears, then press ENTER/YES.
3 Press . or > repeatedly until "Name
Copy ?" appears, then press ENTER/YES.
4 Press . or > repeatedly to select "Disc"
(when copying the disc title) or the track
number with the title you want to copy, then
press ENTER/YES.
When "No Name" appears
No disc title or no track title is labelled.
5 Press . or > repeatedly to select the copy
destination track number or "Disc" (when
copying as the disc title), then press ENTER/
YES.
When "Overwrite??" appears
The copy destination already has a disc or track
title. To continue and copy the title, press
ENTER/YES.
To cancel copying
Press MENU/NO.
Checking the titles
To check the disc titles, press SCROLL in stop
mode. To check the track title, press SCROLL
during play. The title appears scrolling in the
display. To stop scrolling, press SCROLL while
scrolling. Press the button again to resume
scrolling.
36
(blank space).
Erasing the titles
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until "Name ?"
appears, then press ENTER/YES.
3 Press . or > repeatedly until "Name
Erase?" appears, then press ENTER/YES.
To erase all the titles, press . or >
repeatedly until "Name All Ers?" appears, then
press ENTER/YES.
4 Press . or > repeatedly until the desired
title to erase appears, then press ENTER/YES.
"Complete !!" appears and the title is erased.
To cancel erasing
Press MENU/NO.
To return to the condition before
labelling or erasing
You can return to the original condition
immediately after labelling or erasing a title (see
page 43).
Notes
• You can label a track title during play. The
playback repeats until you finish labelling.
• If the MD is record protected, "C11" and
"Protected" appear alternately and the MD cannot
be edited. Remove the MD, then slide the record
protection tab to the closed position (see page 24).