Step 2: Setting The Time - Sony LBT-DR330 Operating Instructions Manual

Step 1: Hooking up the system
(continued)
Inserting two size AAA (RO3)
batteries into the remote
ree
Tips
¢ With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
¢ When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY/DEMO while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 2: Setting the
time
You must set the time before using the timer
functions. The clock is on a 24-hour system
for the European and Brazilian models, and a
12-hour system for other models.
The 24-hour system model is used for
illustration purposes.
1 3,5 2,4
1° Press ©/CLOCK SET.
The hour indication flashes.
wy nm
Litt Li
ay "<-
+/— to set the hour.
2 Press TUNING
sesso panne
3 Press ENTER/NEXT.
The minutes indication flashes.
aad
ta aye
iF wu.
YY
4 Press TUNING + /— to set the
minutes.
r
~ v Aw
1 hag) IT
i} » v4
5 Press ENTER/NEXT.
The clock starts.
_oratanineseananseimacttycart