Table of Contents
Advertisement
Main Screen
Make sure your TV/Monitor is ON and set to the appropriate HDMI channel if required.
Turn on the Switch.
Turn on the NVR, the machine will take a minute to start.
The images from all 4 cameras should now be displayed on your TV/Monitor.
Quick Operations
At the bottom of the screen is the quick operations
bar as follows:
Click to show the power off panel to either halt
or reboot the system
Click to show the channel switch panel and
select the channel you want.
Switch to the channel you want first, and click
to enter the zoom-in mode.
Click to enter PTZ Mode and show the PTZ
camera control panel.
Click to open the IP search window and check
the current connection status of each channel.
Main Menu
The main menu is at the bottom of the screen to the
right of the quick operations menu.
QUICK START: Click to set the status display,
image settings, and date & time.
SYSTEM: Click to set the system
configurations.
EVENT INFORMATION: Click to enter the
event search menu.
ADVANCED CONFIG: Click to adjust
advanced system settings such as recording
modes and camera resolutions.
SCHEDULE SETTING: Click to set timer and
detection recording.
4
Advertisement
Table of Contents
