Table of Contents
Advertisement
Set the Time and Date
When using your NVR for the first time, you will have to set the DATE and TIME.
Left clicking anywhere on the screen will bring up the password menu.
Use the mouse to enter the NVR admin password with the on-screen keypad.
Default:
The default username is admin, the password is also admin.
(Users can alter the password later. Please refer to the Advanced set up guide CD)
Choose "QUICKSTART"
Important:
If you change the date or time on your NVR after the recording function is activated, the recorded data may be
deleted. After setting the date and time, it's recommended to clear all HDD data, and start recording again.
then "TIME SETUP" to set the date and time.
5
Advertisement
Table of Contents
