Table of Contents
Advertisement
Quick Links
Star-Light Plus™ 5MP Universal HD
over Coax
DWC-B7553TIR – gray housing
DWC-B7553TIRW – white housing
User Manual
ver.: 10/22
Before installing and using the camera, please read this manual carefully.
nstalling and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
to keep it handy for future reference.
®
bullet camera
Advertisement
Table of Contents
Related Manuals for Digital Watchdog Star-Light Plus DWC-B7553TIR
Summary of Contents for Digital Watchdog Star-Light Plus DWC-B7553TIR
- Page 1 Star-Light Plus™ 5MP Universal HD over Coax ® bullet camera DWC-B7553TIR – gray housing DWC-B7553TIRW – white housing User Manual ver.: 10/22 Before installing and using the camera, please read this manual carefully. nstalling and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
-
Page 2: Table Of Contents
Contents INTRODUCTION Safety information Features Product and accessories Parts names Dimensions INSTALLATION Installation Connecting the camera to monitors Adjusting the camera's angle OSD MENU Menu tree OSD menu - Exposure OSD menu - Color OSD menu - Day and night OSD menu - Function OSD menu - Motion OSD menu - Privacy... -
Page 3: Safety Information
Safety Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage This exclamation point symbol is intended to alert consisting a risk of electric shock is present the user to the presence of important operating... - Page 4 Safety Information 7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock. 8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center.
- Page 5 Important Safety Instructions 1. Read these instructions. - All these safety and operating instructions should be read before the product is installed or operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3.
- Page 6 Important Safety Instructions 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
- Page 7 Disposal of Old Appliances 1. When this crossed-out wheel bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately form the municipal waste stream in accordance to laws designated by the government or the local authorities.
-
Page 8: Features
Features Universal HD over Coax ® technology with HD-Analog, HD- █ TVI, HD-CVI and all analog to 960H signal support Star-Light Plus™ color in darkness technology █ 1/2.8" image sensor █ 5MP at 20fps, 4MP at real-time 30fps █ 4.0mm fixed lens █... -
Page 9: Product And Accessories
Product and Accessories Please check if all the camera and accessories are included in the package. Camera Screws and Mounting template Quick setup Torque wrench plastic anchors-4pcs guide... -
Page 10: Parts Names
Parts Names Pan, tilt and rotate screw Mounting bracket Lens Power cable IR LED BNC cable Reset button... -
Page 11: Dimensions
Dimension Unit: inches (mm) 6.41" (163mm) 3.64" (92.5mm) 2.65" (67.5mm) 2.51" (64mm) - Page 12 Installation - Disassemble the camera Before installing your camera, read the following cautions. 1. The mounting surface must withstand five times the camera weight. 2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may cause a short or fire.
- Page 13 Connecting to Monitors Use the diagram below to connect the camera to a Universal HD over Coax ® DVR. Video output 12VDC Universal HD over Coax ® - Power connection - the camera supports 12VDC voltage only. - All cameras are equipped with a test video output for on-site configuration. NOTE: To use your Star-Light Plus™...
-
Page 14: Adjusting The Camera's Angle
Adjusting the Camera angle To adjust the camera's pan, tilt and position, loosen the screw at the base of the camera's bracket. Adjust the camera to achieve the desired position. When done, lock the tilting screw back. - Page 15 OSD Menu Tree EXPOSURE DAY & NIGHT (IR OPTION) EXPO D&N LENS MANUAL / AUTO MODE AUTO / COLOR / B&W EDGE DET OFF / ON IR LED ON / OFF BRIGHTNESS 0 ~ 20 SMART IR 0 ~20 SHUTTER AUTO / MANUAL / FLICKER D>N THRES 0~ 20...
- Page 16 OSD Menu Tree MOTION SETUP MOTI COMM. CAM ID / BAUDRATE / CONFIRM DET WINDOWS 0 ~ 10 OUTPUT FRAME RATE / FREQ / SENSITIVITY ANALOG MODE / CONFIRM OFF / ON MOTION OSD OFF / ON ENG / CHN / CHN(S) / JPN / KOR LANGUAGE TEXT ALARM OFF / ON...
-
Page 17: Osd Menu_Exposure
OSD Menu_Exposure Lens Manual: Manual mode supports the fixed board lens or the manual iris lens. Auto: AUTO mode sets the camera’s iris automatically. EXPOSURE EXPO LENS EDGE DET LENS AUTO LEVEL LEVEL EDGE DET RETURN COLOR BRIGHTNESS RETURN SHUTTER AUTO BACK-LIGHT STARLIGHT... - Page 18 OSD Menu_Exposure (cont.) Back-light EXPOSURE EXPO LENS AUTO HME (highlight masking exposure) 2-MOTOR BRIGHTNESS HME allows objects to appear clearly on the screen by SHUTTER AUTO masking extremely bright areas. BACK-LIGHT STARLIGHT To setup HME, set the level and color of the HME mask. The lower the number, the darker the areas have to be in 3D DNR HIGH...
- Page 19 OSD Menu_Exposure (cont.) EXPOSURE EXPO LENS AUTO 2-MOTOR BRIGHTNESS SHUTTER AUTO BACK-LIGHT STARLIGHT 3D DNR HIGH RETURN Star-Light™ Off / x2 ~ x32 (default : x4) - Automatically activate the camera’s slow shutter when the image is too dark. High values are not recommended as they may causes the image to lag and increase digital noise.
-
Page 20: Osd Menu_Color
OSD Menu_Color WB mode COLOR WHITE BAL. WHITE BAL. AUTO C-TEMP 5000K COLOR GAIN 10 R-GAIN RETURN B-GAIN RETURN Auto Compensates for color temperature changes between 2400K° and 12000K° . Compensates for color temperature changes under 2400K° and over 12000K°. AUTOext Preset Automatically set the white balance based on the current lighting conditions. -
Page 21: Osd Menu - Day And Night
OSD Menu_Day & Night DAY/NIGHT D&N DAY & NIGHT DAY & NIGHT MODE AUTO MODE COLOR MODE B&W IR LED IR LED NOT USED IR LED SMART IR SMART IR NOT USED SMART IR 3 D>N THRES RETURN RETURN N>D THRES D>N THRES NOT USED N>D THRES... -
Page 22: Osd Menu_Function
OSD Menu_Function FUNCTION DEFOG FUNC MODE MANUAL SHARPNESS LEVEL MIDDLE RETURN GAMMA 0.55 MIRROR FLIP D-ZOOM 1.0X DEFOG RETURN Sharpness 0 ~ 10: Set the image’s sharpness. The higher the number, the sharper the image. Gamma 0.45 ~ 0.75: Select the desired gamma level. 0.55 is the default setting. Mirror, flip Mirror: Reflects the camera horizontally. -
Page 23: Osd Menu_Motion
OSD Menu_Motion The camera can detect movement and display an alarm on the screen when movement is detected. MOTION MOTI DET WINDOW WINDOW USE DET WINDOW WINDOW ZONE SENSITIVITY DET H-POS MOTION OSD DET V-POS TEXT ALARM DET H-SIZE SIGNAL OUT DET V-SIZE RETURN RETURN... - Page 24 OSD Menu_Motion (cont.) The camera can detect movement and display an alarm on the screen when movement is detected. MOTION MOTI DET WINDOW WINDOW USE DET WINDOW WINDOW ZONE SENSITIVITY DET H-POS MOTION OSD DET V-POS TEXT ALARM DET H-SIZE SIGNAL OUT DET V-SIZE RETURN...
-
Page 25: Osd Menu_Privacy
OSD Menu_Privacy You can hide some parts of the camera’s view to protect privacy and sensitive data. A total of 24 privacy masking zones are available, including 16 square zones and 8 polygon shaped zones. PRIVACY PRIV ZONE NUM ZONE DISP POLYGON H-POS RETURN... - Page 26 OSD Menu_Privacy (cont.) You can hide some parts of the camera’s view to protect privacy and sensitive data. A total of 24 privacy masking zones are available, including 16 square zones and 8 polygon shaped zones. PRIVACY POLYGON PRIV ZONE NUM ZONE DISP POLYGON POS0-X...
-
Page 27: Osd Menu_Setup
OSD Menu_Setup COMM OUTPUT SETUP CAM ID FRAME RATE 1440p 30 BAUDRATE 9600 FREQ 60HZ CONFIRM ANALOG MODE HD_T COMM RETURN CONFIRM OUTPUT RETURN LANGUAGE CAM TITLE RESET RETURN COMM Adjust the camera’s ID and baudrate. The camera’s default protocol is Pelco-D. - Cam ID: Provide an ID number for the camera (0 ~ 255). - Page 28 OSD Menu_Setup (cont.) SETUP COMM OUTPUT LANGUAGE CAM TITLE RIGHT UP RESET RETURN Language Select from the following: English (default), Chinese, Chinese (S), Japanese and Korean. CAM title Add a name to the camera. Set the title by using the joystick right up / left down. Reset Reset the camera to its default settings.
-
Page 29: Osd Menu_Exit
OSD Menu_Exit EXIT EXIT SAVE&EXIT EXIT RETURN Save and exit Exit the OSD menu after saving the recent changes. Exit Exit the OSD menu without saving any changes. -
Page 30: Troubleshooting
Troubleshooting Before sending your camera for repair, check the following or contact our technical specialist. FOR NO VIDEO Check the coaxial cable and make sure it is connected securely. Check the power supply and make sure the camera has the proper voltage and current. - Page 31 Specifications VIDEO Image sensor 1/2.8” CMOS sensor Active pixels 2608(H) x 1960(V) Scanning system Progressive scan Frequency 60Hz / 50Hz Signal technology Max 5.MP Universal Synchronization Internal 2592x1944 (1944p(20fps) (CVI Max 1440p)/1440p30(25)fps/ Resolution 1080p30(25)fps/720p30(25)fps) F2.0 (30IRE): 0.16 Lux (Color) Minimum scene illumination F2.0 (30IRE): 0 Lux (B&W) Video output (Universal : HD-A/HD-TVI/HD-CVI/CVBS)
- Page 32 Specifications OPERATIONAL (CONT.) Digital Noise Reduction OFF / LOW / MIDDLE / HIGH White balance AUTO / AUTOext / PRESET / MANUAL Day and night AUTO / COLOR / BW Auto gain control 0 ~ 10 Motion detection ON/OFF (4 zones) Privacy zones ON/OFF (box 16 zones / polygon 8 zones) Sharpness...
-
Page 33: Limits And Exclusions
This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state. If the problem is not handled to your satisfaction, then write to the following address: Digital Watchdog, Inc. ATTN: RMA Department 5436 W. Crenshaw Street... - Page 34 Warranty Information Digital Watchdog (referred to as “the Warranter”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows: LABOR: For the initial five (5) years and one (1) year on IR LED from the original purchase date, if the camera is determined to be defective, the Warranter will repair or replace the unit with a new or refurbished product at its option at no charge.
- Page 35 +1(904) 999-1309...