RADVision SCOPIA XT1000 User Manual page 52


MultiImage Type
Select AUTO to enable both PIP and PaP functions. Switch between PIP and PaP by
pressing the pip function key.

Select PIP to enable the PIP function.

Select PaP to enable the PaP function.

MultiImage Mode

By selecting AUTO, PIP and PaP functions are enabled only when needed, that is
when number of video flows is greater than available monitors number, and
automatically place video flows (with precedence to remote ones).

By selecting ON, PIP and PaP functions are enabled if at least two video flows are
available (in case of unique video flow you have a full screen image, e.g. when
system is not connected).

By selecting OFF, PIP and PaP functions are disabled.
Audio - Inputs
This menu contains the following configuration settings:

POD1

POD2

SPDIF/HDMI

Echo Canceller
POD1
In this menu you can:

Enable/disable this input

Set the gain for this input

Enable/disable the echo canceller for this input
RADVISION | User Guide System Configuration Settings | 52