RADVision SCOPIA XT1000 User Manual page 41

Video Camera Presets
The Preset function allows the user to save camera positions (up to a maximum of 99
positions) to enable quick selection of a certain camera frame.
To save a preset:
Step 1
Step 2
To recall a memory location:
Step 1
Step 2
RADVISION | User Guide
Set the desired camera position and adjust the video zoom.
Press the MEMO key on the remote control followed by a memory location
(from 01 to 99); during the operation the system does not give you any
feedback, but at the end a message will appear notifying the stored position.
Press the SEL remote control key
Enter the memory location number corresponding to the desired preset.
Call Management | 41