Last Calls - RADVision SCOPIA XT1000 User Manual

Attention
Call Options
In the Direct call page you can insert number/address to call. Once in the dedicated area,
by pressing the OK key on the remote control you can change characters mode insertion
(available choices being alphanumeric with alpha first, alphanumeric with numbers first,
numbers only), or access the virtual keyboard. Press the C key on the remote control to
erase the last inserted character.
Moreover, it is possible to set some communication parameters:

Basic options – Call profiles, that is H.323 or SIP

Advanced options – Call profiles, Rate (K), Call type.

Call profiles, that is H.323 or SIP.

Rate (K) to select the actual rate for the call.

Call type to select Audio-Video or Audio only calls.

Last Calls

To make a Reselection:
Step 1
Step 2
Step 3
A cyclic buffer of 25 numbers is available to store calls.
RADVISION | User Guide
A virtual keyboard can be activated if you need to enter text (e.g., aliases
for calls). To change the input mode, see Insertion of Characters in the
Alphanumeric Fields.
To activate it, simply press OK with the cursor in the input area.
Then select the desired letter on the virtual keyboard by moving the cursor
over it, and press OK.
From the home page, select Make your call in the button area.
Select Last calls by pressing the dedicated function key on the remote control,
A list will appear, and numbers can be selected and/or modified.
Call Management | 33