RADVision SCOPIA XT1000 User Manual page 51

Monitor
This menu contains the following configuration settings:

General

Graphic adjustment

PIP – PaP
General
In this menu you can:

Set output configuration (auto, 1 monitor, 2 monitors)

Set the Resolution for HD1 output (auto, 1080p, 720p)

Set the Resolution for HD2 output (auto, 1080p, 720p)

Reset HD1 or HD2 monitors if you experience flickering problems or missing audio
output from the monitor
Graphic Adjustment
Make setting operations to adjust the image on edges cut by some kind of monitors (same
operation as described in the Quick Setup section).
PIP - PaP
In this menu you can set options connected to PIP (Picture In Picture) and PaP (Picture and
Picture) functions.
The PIP function allows seeing two overlapped images in one monitor, that is remote image
in full-screen format, and local image in a smaller overlapped window.
The PaP function is a Dual Monitor emulation on the main output. It allows to see in one
monitor two windows side by side, with local and remote images.

PIP – position, to set the default PIP position

PIP – rotation, to enable/disable rotation, and its direction (rotation being controlled by
pip function key on the remote control
RADVISION | User Guide System Configuration Settings | 51