Maintenance; Information About Maintenance - Seca 374 User Manual

Malfunction
Er:X:12
... is displayed?
Er:X:16
... is displayed?
... when the Enter key
(send/print) is pressed
Er:X:71
and
played?
... when the Enter key
(send/print) is pressed
Er:X:72
and
played?

9. MAINTENANCE

9.1 Information about maintenance

The scales have been switched on with too great
a load.
- Reduce load on scales
- Restart scales
Oscillation of the scales has occurred, preventing
determination of the zero point.
- Do not touch the trolley or table supporting
the scales
- Restart scales
Data transmission not possible, wireless module is
disabled.
is dis- - Activate wireless module (see "Activate
wireless module (SYS)" on page 49).
Data transmission not possible, no wireless group
set up.
- Set up wireless group (see "Set up wireless
is dis-
group (Lrn)" on page 50).
Your seca scales leave the factory with an accuracy
greater than ± 0.3%. To preserve this level of accuracy
the product must be set up carefully and serviced regu-
larly. We recommend having it serviced every 3 to 5
years depending on how often the scales are used.
Cause/Remedy
ATTENTION!
Incorrect measurement due to improper
maintenance
− Make sure that maintenance and repair are
only carried out by an authorised service
partner.
− You can find your local service partner at
www.seca.com or just send an e-mail to
service@seca.com.
English
Maintenance • 55