Restore Factory Settings; (Reset); Seca 360° Wireless Network; Introduction - Seca 374 User Manual

Restore factory settings

6. SECA 360° WIRELESS NETWORK

6.1 Introduction

You can restore the factory settings for the following
functions:

(RESET)

Autohold (Ahold)
Acoustic signal (Press)
Acoustic signal (Hold)
Attenuation (Fil)
Stored value Breast Milk Intake
Function (BMIF)
Weight unit
Wireless module (SYS)
Autosend (Asend)
Autoprint (APrt)
1. Select the item "Reset" in the menu.
2. Confirm the selection.
You will leave the menu automatically.
3. Switch the scales off.
The factory settings are restored and will be availa-
ble when the scales are next switched on.
This device is equipped with a wireless module. The
wireless module allows measured results to be trans-
mitted wirelessly for analysis and documentation. Data
can be transmitted to the following equipment devices:
• seca wireless printer
• PC with seca USB wireless module
Function
NOTE:
The wireless module is switched off when
restoring the factory settings. Data for existing
wireless groups remains in the memory. These
groups do not need to be set up again.
seca 360° wireless Network • 47
English
Factory setting
depending on
model
off
on
0
0 kg
kg
off
off
off