What Do I Do If; Maintenance/Verification; Information On Servicing (Seca 750/760/762) - Seca 761 Manual

8. WHAT DO I DO IF ...?

Malfunction
... the scale does not
show any weight?
... the scale does not
show any plausible
weight?

9. MAINTENANCE/VERIFICATION

9.1 Information on servicing (seca 750/760/762)

CAUTION!
Bodily injury
If you find faults or deviations during the
function check which you are unable to remedy
with the aid of the section "What do I do if ...?",
you may not use the device.
►
Have the device repaired by seca service or
an authorized service partner.
►
You should also follow the instructions in the
section "Maintenance/verification" on
page 37.
Cause/Remedy
The device is not ready for use
- Remove transport lock
• Before weighing pointer does not read "0"
- Adjust display
• Force shunt: scale is e.g. touching a wall or
patient is supporting his/her weight against the
wall.
- Move scale away from wall
- Use transport lock as wall spacer
- Ask patient to stand on the scale unaided
The product must be set up carefully and serviced
regularly. Depending on how frequently the scale is
used, we recommended servicing at intervals of 3 to 5
years.
ATTENTION!
Incorrect measurements as a result of poor
servicing
►
Please only have servicing and repairs per-
formed by an authorized service partner.
►
You can find service partners in your area at
www.seca.com or by sending an e-mail to
service@seca.com.
English
What do I do if ...? • 37