Pioneer DVR-645H-S Operating Instructions Manual page 38

DVR645H_WY_EN.book 38 ページ ２００６年７月５日 水曜日 午前１０時２５分
04
Getting started
Checking the downloaded data the
following day
1 Display the GUIDE Plus+ screen.
GUIDE
You should see a grid filled with channel
logos and TV listings information. Use the
buttons to review the list. If you notice
that there are channels missing, or that
there are channels in the list that you don't
get, go to the Editor screen:
• Press repeatedly until the Menu bar is
highlighted.
until Editor is highlighted. The
• Press
main area of the screen now shows a list
of channels. Those that are turned ON
are displayed in the grid; those that are
OFF are hidden. Use the
buttons to move down the list and turn
channels ON or OFF as necessary.
• For any channel that you turn ON , the
GUIDE Plus+ system will need to know
how it is received (the source) and on
which program number. The source may
be the built-in tuner of this recorder, or
an external receiver. The program
number is the number on which the
38
En
channel can be found on its receiving
device/source. The entry in the Editor
screen must match this number for
correct recording of that channel.
• The above is especially important for the
'host channel'. Please make sure that
the host channel is always switched ON .
REC MODE
AUDIO SUBTITLE ANGLE
PLAY MODE
2 Change the program
numbers as you like.
Changing the program numbers allows you
to decide the order in which the channels
change when stepping through them
sequentially. You can do this to group
certain channels together, for example.
3 When you're done, press the BLUE
Action button (Home) to get back to the
GUIDE Plus+ home screen.
• You can find detailed information on
using the GUIDE Plus+ system in the
following chapter.