Pioneer DVR-645H-S Operating Instructions Manual page 107

DVR645H_WY_EN.book 107 ページ ２００６年７月５日 水曜日 午前１０時２５分
Copying and backup
Copying from DVD to HDD
Important
• The DVD to HDD Copy screen isn't
accessible when a finalized Video mode
disc or a DVD-Video is loaded. As long as
the disc is not Copy Guard protected, you
can still use the One Touch Copy
function, however (See One Touch Copy
on page 102).
• The recorder can only store one Copy List
at a time.
• The Copy List will be erased if:
– any of the titles on the DVD disc are
erased or edited.
– the disc tray is opened.
– playback is switched between Play List
and Original.
– the DVD disc is re-initialized or
finalized.
– the recorder is reset to its factory
settings (see Resetting the recorder on
page 160).
• It may not be possible to copy from a
DVD disc that was recorded on a
different DVD recorder or a PC.
HOME MENU
1 Select 'Copy' from the Home
Menu.
ENTER
2 Select 'DVD/CD
ENTER
3 Select a Copy List type.
• Selecting Create New Copy List will
erase any Copy List already stored in the
recorder.
ENTER
4
(highlight a title and press ENTER to add).
Titles you've added to the Copy List are
highlighted in pink.
ENTER
5
command menu panel to proceed to the
title edit screen.
ENTER
6
A menu appears of Copy List editing
commands:
• Erase – Erase individual titles from the
Copy List (see Erase on page 91).
• Move – Change the order of titles in the
Copy List (see Move on page 97).
• Preview – Check the content of a title in
the Copy List.
• Cancel – Exit the menu.
Repeat this step for as many titles you have
that need editing.
ENTER
7
command menu panel to proceed to the
copy options screen.
• Select Recording Mode if you want to
HDD'.
change the recording quality (see
Recording Mode on page 108).
ENTER
8
copying.
Add titles to the Copy List
Select 'Next' from the
Select a title to edit.
Select 'Next' from the
Select 'Start Copy' to start
10
107
En