Connecting An External Decoder Box (2) - Pioneer DVR-645H-S Operating Instructions Manual

DVR645H_WY_EN.book 21 ページ ２００６年７月５日 水曜日 午前１０時２５分
Connecting up
Connecting an external
decoder box (2)
If you only have a decoder, connect it to this
recorder and your TV as shown on this
1
page.
Using the setup on this page you can:
• Record scrambled channels received
using the recorder's built-in TV tuner.
Important
• Do not connect this recorder 'through'
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
SCART AV
CONNECTOR
2
Y
AC IN
AV 1 (RGB) – TV P B
DIGITAL
CONTROL
OUT
P
R
COAXIAL IN G-LINK COMPONENT
VIDEO OUT
3
SCART AV
CONNECTOR
Note
1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:
• Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 135).
• From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual
CH Setting on page 134).
ANTENNA
IN
TV
1
ANTENNA
IN (RF IN)
IN
HDMI OUT
AV 2 (INPUT 1/DECODER)
OUTPUT
R L R L
OUT
ANTENNA
AUDIO VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
INPUT3
ANTENNA
OUT
1
Antenna/cable TV
Decoder wall outlet
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Use a SCART cable (not supplied) to
connect the AV1(RGB)-TV AV connector
to a SCART AV connector on your TV.
This enables you to watch discs.
3 Use another SCART cable to connect
the AV2(INPUT 1/DECODER) AV
connector to a SCART AV connector on
your decoder box.
This enables you to record scrambled TV
channels.
02
21
En