Pioneer DVR-645H-S Operating Instructions Manual page 34

DVR645H_WY_EN.book 34 ページ ２００６年７月５日 水曜日 午前１０時２５分
04
Getting started
Press then use the
select 'On' or 'Off' for summer time,
then press ENTER.
Select On if you are currently using
summer time.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Set the date (day/month/year) and
time, then press ENTER to make all
the settings.
k Setting Manual Clock Setting
Line System
Date
er Save
P
Time
p Navigator p Navigator
Time Zone
Summer Time
• Use the buttons to change the
value in the highlighted field.
• Use the buttons to move from one
field to another.
• You can go back to the previous screen
at anytime in the Setup Navigator by
pressing RETURN .
ENTER
7 Select the TV screen type,
'Wide (16:9)' or 'Standard (4:3)'.
k Setting TV Screen Size
Line System
er Save Wide (16:9)
P Standard (4:3)
p Navigator p Navigator
34
En
buttons to
1/2
Austria
Vienna
On
2/2
SUN 01 / 01 / 2006
00 : 00
Austria
Vienna
On
ENTER
8 Select whether or not your TV
is compatible with progressive scan
video.
k Setting Progressive
Line System
er Save Compatible
P Not Compatible Not Compatible
p Navigator p Navigator Don't Know
• Note that progressive scan video is only
output through the AV1(RGB)-TV
connector and the component video
outputs.
9 Press to continue after reading
ENTER
the HDD caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
Line System
not be possible.
er Save
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
10 Select 'Finish Setup' to exit
the Setup Navigator, or 'Go Back' if you
want to start again.
k Setting
S et up i s com pl et e!
Line System
er Save Enj o y u si ng your D V D r eco r der !
Fi ni s h S etup Fi ni sh S etup
p Navigator p Navigator G o B ack
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See Manual
CH Setting on page 134.