Pioneer DVR-645H-S Operating Instructions Manual page 134

DVR645H_WY_EN.book 134 ページ ２００６年７月５日 水曜日 午前１０時２５分
16
The Initial Setup menu
Setting
Manual CH Setting
Channel Swapping
Video In/Out
Input Colour
System
See also About the input colour system on page 145 for more information on this setting.
134
En
Options Explanation
Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
NEXT buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the Skip
setting to On .
• Set the CH SYSTEM setting to match the channel
system of your country or region.
• Set the CHANNEL setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the AFT
setting to Off then adjust the Level setting.
• Set the Sound System setting to match the sound
system of your region.
• The Name field allows you to input a name of up to
five characters for the current channel preset.
• If the currently selected channel is scrambled
requiring a decoder connected to the AV2 (INPUT 1/
DECODER) , set the Decoder setting to On .
Next Screen
Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press ENTER .
Next Screen
Proceed to the next screen to set the input colour
system for the external input and the built-in TV
tuner. Use the
preset. On the default Auto setting the recorder can
generally correctly detect whether the input signal is
PAL, SECAM, 3.58 NTSC or PAL-60, but in some
cases you may have to set it manually if the picture is
displayed incorrectly.
PREV /
CHANNEL +/–
buttons to change the