Simultaneous Recording And Playback (Chase Play) - Pioneer DVR-645H-S Operating Instructions Manual

DVR645H_WY_EN.book 66 ページ ２００６年７月５日 水曜日 午前１０時２５分
06
Recording
STANDBY/ON
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows LOCK .
If any buttons are pressed on the remote or
front panel, LOCK is briefly displayed again.
• To unlock the recorder, press and hold
STOP on the front panel (while the
recorder is stopped) for three seconds
until the display shows UNLOCK .
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder
doesn't start recording!
Check that the disc loaded or HDD is
recordable, not locked (see Lock Disc on
page 125), and that there are fewer than
99/999 titles already on the DVD/HDD.
• The recorder won't let me enter a timer
program! Why not?
You can't enter a timer program if the
clock isn't set.
• What happens when two or more timer
programs overlap?
Basically, the program with the earlier
recording start time has priority.
However, the recorder will start
recording the program with the later
start time after the earlier program is
Note
1 You can't start playback immediately after recording starts. Simultaneous playback and recording doesn't work
while copying or backing up.
66
En
finished. If two programs have the same
times (but different channels, for
example), the program set most recently
takes priority.
If VPS/PDC is active for two timer
programs that are programmed to start
at the same time, then the program that
actually starts first takes priority.
Simultaneous recording and
playback (Chase Play)
HDD
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is 'chasing' the
recording).
In fact, you're not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you're recording to the HDD) by
selecting it from the Disc Navigator screen
(see Using the Disc Navigator with recordable
discs and the HDD on page 76).
DVR-645H-S: Chase Play is not possible
when DV is the recording input.
PLAY
• Press during recording to start
playback from the beginning of the
1
current recording .
• DISC Press during recording to select
NAVIGATOR
another title to play.