Pioneer DVR-645H-S Operating Instructions Manual page 129

DVR645H_WY_EN.book 129 ページ ２００６年７月５日 水曜日 午前１０時２５分
The Video Adjust menu
ENTER
3 Select the setting you want to
adjust.
Memory1
Prog. Motion Motion
PureCinma
3-D Y/C Motion
YNR
CNR
White AGC
White Level
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive.
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually set
to Auto , but try switching to Off if the
picture appears unnatural.
• 3-D Y/C – Adjusts the brightness /
colour separation (NTSC video input
only).
• YNR – Adjusts the amount of noise
reduction (NR) applied to the Y
(brightness) component.
• CNR – Adjusts the amount of noise
reduction (NR) applied to the C (colour)
component.
• White AGC – Turn on for automatic
white level adjustment.
• White Level – Adjusts the intensity of
white.
• Black Level – Adjusts the intensity of
black.
Note
1 When White AGC is On , the White Level setting can't be adjusted.
Pr 1
Still
Auto1
Still
Off Max
4
Max
Off
setting.
Off
Min Max
5
You can now use the preset for any other
input or the built-in TV tuner.
1
• Black Setup – Corrects the standard
reference black level (NTSC video input
only).
• Hue – Adjusts overall balance between
red and green.
• Chroma Level – Adjusts how rich the
colours appear.
ENTER
Adjust the currently selected
HOME MENU
Press to exit.
Tip
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.
15
129
En