Selecting Other Languages For Language Options - Pioneer DVR-645H-S Operating Instructions Manual

DVR645H_WY_EN.book 145 ページ ２００６年７月５日 水曜日 午前１０時２５分
The Initial Setup menu
About NTSC on PAL TV
Depending on the Input Line System setting
and the NTSC on PAL TV setting, the signal
format output when the recorder is stopped
varies as shown in the table below.
Input Line NTSC on PAL
System TV
625 System Off
On
525 System Off
On
About the input colour system
The available options of the Input Colour
System setting depend on the Input Line
System setting. The table below shows the
different options available.
Input Line
Built-in tuner
System
625 System Auto
PAL
SECAM
525 System n/a
Additional information about
component video output
If you switch the Component Video Out
setting to Progressive when using a TV that
is not compatible with progressive-scan
video, you will not be able to see anything
displayed on your TV. If this happens, press
and hold the
panel, then press
recorder's video output back to Interlace.
Output
Selecting other languages
when
for language options
stopped
PAL
PAL
ENTER
1
NTSC
language list.
PAL–60
This option appears in the settings for DVD
Menu Language, Audio Language, and
Subtitle Language.
ENTER
2
want.
External
Initial Setup
input
Basic
Tuner
Auto
Video In/Out
Audio In
PAL
Audio Out
Language
Language
Recording
SECAM
Playback
Auto
• Select by language name: Use the
3.58 NTSC buttons to change the language.
• Select by code number: Press
PAL–60
use the number buttons to enter the
four-digit language code.
See Language code list on page 157 for a list
of available languages and corresponding
codes.
STOP button on the front
PLAY . This will set the
Select 'Other' from the
Select the language you
OSD DVD Menu Language
Audio Language
Language English
Subtitle Language
0 1 4
Number 5
Auto Language
DVD Menu Language DVD Menu Language
Subtitle Display
then
16
145
En