Regency E33S-NG1 Sunrise Owners & Installation Manual page 13

Hide thumbs Also See for E33S-NG1 Sunrise:
Table of Contents

Advertisement

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
NOTE: See page 1 for H25 / H27 conversion instructions and page 4 for P33S-4 conversion instructions.
Each Kit contains one LP
Conversion Kit and one DC
Sparker Kit.
LP Conversion Kit Contains:
Qty. Part #
Description
1
904-163
Burner Orifi ce #54
1
918-590
Decal "Converted to
LPG"
1
908-528
Red "LPG" label
1
904-529
5/32" Allen Key
1
910-037
LPG Injector
(Pilot Orifi ce)
1
918-480
Instruction Sheet
DC Sparker Kit Contains:
Qty. Part #
Description
1
820-475
Bracket DC Sparker
1
820-476
Bracket DC Sparker
1
904-153
Washer #8 External Star
1
904-330
Nut 8-32 Hex
1
904-438
Plug Nylon 0.750 Hole,
Black (for H25 only)
1
904-531
Bushing Split Plastic
0.500 in.
1
904-543
Screw 8-32 x 3/4 Pan
Head
2
904-553
Screw #8 x 1/2 Type
"B", Black Oxide
1
910-073
Spark Generator
Battery Holder
1
910-074
Spark Generator
Switch C/W Wire
1
910-078
Battery Size AA
Energizer En91
2
910-199
Clip Wire Holder
1
910-903
Wire Fan To Power Cord
Ground 30 in.
904-781
Velcro Hook, Black
904-782
Velcro Hook, Black
1)
Turn off the gas supply.
2)
Remove the glass door.
E33S only:
a) Remove the 2 screws at the bottom
of the glass door.
Regency
E33S-1 Sunrise Gas Insert
®
918-480d
Conversion Kit #434-969 from NG to LPG
cONVERSION kIT #434-969 FROM NG TO lp
for E33S-1/U32S using SIT 820 NOVA Gas Valve
IF IN DOUBT DO NOT DO THIS CONVERSION!!
U32S only:
a) Release the two hooks from the
bottom of the glass door.
b) Swing the door out 45 degrees from
the bottom and lift up and out (applies
to both units).
3)
Remove the burner by undoing the 2
screws as shown below.
Burner
Burner screws on E33S
7
E33S-1 / U32S
installation
Burner screws on U32S
4)
After screws have been removed,
slide the burner to the left, then lift out
carefully (U32S unit only.)
(E33S - lift burner directly out).
U32S burner shown
5)
Remove the pilot shield by removing the
2 screws as shown below.
6)
Remove the base cover by lifting up
from the back and maneover out.
Base Cover
13
11/03/09

Advertisement

Table of Contents
loading

This manual is also suitable for:

E33s-lp1 sunrise

Table of Contents