Table of Contents
Advertisement
4.9
Hinge
Unscrew the outer door, the base, the angle strip and the side panels;
disengage the tension cord from the hinge lever; unscrew the hinge
lever from the inside door; unscrew the hinge plate from the container
frame.
Unscrew the fixing screw which connects the hinge to the base pan;
lever the hinge plate off the frame; pull the hinge up and out; remove
spring clamp;
Two-piece hinge bearing bush:
Open the bearing bush by disengaging the spacer with a screwdriver
(see sketch)
One-piece hinge bearing bush:
Open the bearing bush by bending up the catches with a screwdriver.
When the bearing bush is removed, it must be renewed.
202_58300000104305_ara_en_b – 02.11.a
A
= Hinge plate
B
= Hinge lever
C
= Bearing bush
D
= Spring clamp
E
= Tension cord
F
= Tension spring
G
= Spacer
H
= Catches
Seite 22 von 54
Hide quick links:
Advertisement
Table of Contents
