Operation; Function - Bosch GV 630 S Repair Instructions

3

OPERATION

3.1

Function

3.1.1 Main Switch
It is placed in the left side out of the control module.
202_58300000104305_ara_en_b – 02.11.a
3.1.2 Pushbuttons / Additional functions
Timer programming (ZVW)
The timer programming button enables the start time to be delayed by
up to 24 h
Top basket (optional)
The top basket button must be pressed if only the top basket is to be
rinsed. The water points are positioned for top basket rinsing
throughout the rinse cycle. However, the programme sequence is the
same as for alternate rinsing.
3.1.3 LED's
LED of tap closed
Low rinse aid display
Low salt display
Timer Preselection
Top basket funtion
3.1.4 Display
The display consists of a 2 1/2-digit 7-segment display. The expected
remaining running time is displayed included times longer than 99
minutes.
The remaining running time is recalculated at the end of the heating
positions. If deviations occur on account of the aqua sensor decisions,
water supply temperature, number of utensils, etc., the indicated
remaining running time is corrected in these positions. Time jumps of
up to 60 minutes may occur.
3.1.5 Program selector
Seite 7 von 53