Stihl TSA 230 Instruction Manual page 49

Hide thumbs Also See for TSA 230:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 44
Keep the handles clean, dry and
free of oil as well as dirt – important
for safe guiding of the parting-off
grinder.
Check contacts in the battery
compartment of the cut-off machine
for foreign matter and dirt
Fit the battery correctly – it must
engage audibly
Do not use defective or deformed
batteries
For wet applications, provide
sufficient water
The cut-off machine should only be used
if it is in full working order – risk of
accident!
Switching on the machine
On even ground, ensure a firm and
secure footing and hold the cut-off
machine firmly – the abrasive wheel
must not touch any objects or the ground
and must not be in cutting action.
The cut-off machine is a one-person
unit. Do not allow other persons to be
near the machine.
Switch on as described in the Instruction
Manual – see "Switching on the
machine".
After releasing the trigger switch, the
abrasive wheel keeps on running for a
while – danger of injury due to coasting
effect!
During operation
Use the cut-off machine only for hand-
held cutting.
TSA 230
Ensure you always have a firm and safe
footing.
Always hold the cut-off machine firmly
with both hands: Right hand on the rear
handle – even if you are left-handed. To
ensure reliable control, wrap your
thumbs tightly around the handlebar and
handle.
When a cut-off machine with an abrasive
wheel rotating is moved in the direction
of the arrow, a force is produced which
causes the machine to tip sideways.
The object to be parted-off has to be
firmly supported. Always guide the cut-
off machine towards the workpiece –
never in reverse.
Set the abrasive wheel guard so that
particles of material are guided away
from the user and cut-off machine.
Note the direction of flight of the
removed particles of material.
In case of imminent danger or in an
emergency, switch off the machine
immediately, move the locking lever to
ƒ and remove the battery.
Keep clear the working area – bear in
mind obstacles, holes and pitches.
This cut-off machine can be used for
work in the rain or wet. Allow the cut-off
machine or battery to dry out separately
if they are wet after use.
Do not leave the cut-off machine
outdoors in the rain.
Take care with slickness, moisture,
snow, on slopes, on uneven terrain, etc.
– risk of slipping!
Never work alone – stay always in
earshot to other persons, who can
render first aid in case of emergency.
Pay increased attention and caution with
your ear defenders put-on – the
perception of noise of potential danger
(shouts, signal sounds, etc.) is
restricted.
English
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents