cctv camera pros iDVR-PRO4A User Manual page 56

System Setting
Motion Sensor
\ \
You can set an action to execute when a motion is detected.
For the settings of the motion sensor, move to <CAMERA SETUP>.
From <SYSTEM SETUP> - <EVENT>, select
1.
<MOTION SENSOR>.
Use the mouse to specify the ignorance interval and
2.
operation.
IGNORING INTERVAL : Specify the minimum
i
interval of the motion event occurrence.
For example, even if you have set the minimum
frequency to 5 seconds and another motion event
occurs in less than 5 seconds after the last motion
event occurred, the new event will be ignored. If
too many motion events occur, adjust to shorten
the interval.
Motion recording will be triggered immediately after the motion occurred regardless of the above settings.

ALARM OUTPUT : Specify the alarm output channel if a motion is detected by the motion sensor.
i
: Specify the output of the buzzer if a motion is detected by the motion sensor.
i
: Select to display the video popup if a motion is detected by the motion sensor.
i
: Select to send an email if a motion is detected by the motion sensor.
i
: Select whether to upload event notification onto the FTP upon detected motion event.
i
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
4.
previous menu.
Video Loss
\ \
You can specify a reaction to the case where no video is received from the camera.
From <SYSTEM SETUP> - <EVENT>, select
1.
<EVENT LOSS>.
Use the mouse to specify the reaction to a video loss
2.
ALARM OUT : Specify the alarm output channel if
i
a video loss occurs.
: Specify the output of the buzzer if a video
i
loss occurs.
: Select to send an email if a video loss occurs.
i
: Select whether to upload event notification
i
onto the FTP upon detected video loss event.
To apply the change, click <APPLY> in the bottom of
3.
the screen.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
4.
previous menu.
56
|
System Setting