Ptz Setup - cctv camera pros iDVR-PRO4A User Manual

System Setting
Right-click any area to display the popup window as
3.
in the right picture.
While the popup window is displayed, select
4.
<Sensitivity> to set the motion detection sensitivity
of the channel currently selected.
Channel: Select the channel to set the motion
i
sensitivity.
SENSITIVITY : 1(Low) ~ 10(High) - The higher
-
the number is, the more higher the sensitivity
level becomes.
DAYTIME : specify the time period that will be
i
considered as daytime.
DAYTIME : specify the <SENSITIVITY> for the daytime.
-
NIGHTTIME : specify the <SENSITIVITY> for the nighttime.
-
Images recorded in a low contrast scene such as at night cause severe noise, triggering the motion event too often.

If unwanted events occur frequently at night, you may want to reduce the motion sensitivity for the night duty.


PTZ Setup

\ \
You can configure PTZ cameras connected to each channel. Set the camera ID, protocol, baud rate and PTZ control
speed for each channel.
From <SYSTEM SETUP> - <CAMERA>, select
1.
<PTZ SETUP>.
Use the mouse to set protocol and bitrate of each
2.
channel.
Refer to user s manual of the camera or consult camera

'
installation service provider for further details on setting
the PTZ camera, such as camera address, protocol and
baud rate.
To apply your changes, click <APPLY> button.
3.
Once the setup completed, click <CLOSE> button on
4.
the bottom to display a confirmation dialog.
Click <CANCEL> to return to the previous menu.
32
|
System Setting