1. Manuals
  2. Brands
  3. cctv camera pros Manuals
  4. DVR
  5. JPEG2000
  6. User manual

cctv camera pros JPEG2000 User Manual

Stand alone dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
JPEG2000 Stand alone DVR User Guide
CONTENTS
............................................................................... 3
............................................................................... 3
............................................................................... 4
............................................................................... 6
............................................................................... 8
............................................................................... 9
............................................................................... 10
............................................................................... 11
............................................................................... 12
............................................................................... 14
............................................................................... 15
............................................................................... 16
............................................................................... 17
............................................................................... 17
............................................................................... 17
............................................................................... 18
............................................................................... 19
............................................................................... 19
............................................................................... 19
............................................................................... 20
............................................................................... 21
............................................................................... 24
............................................................................... 25
............................................................................... 26
............................................................................... 34
............................................................................... 37
............................................................................... 38
............................................................................... 43
............................................................................... 43
- 1 -
Date: 2007/4/6 VER: 1.61

Advertisement

Table of Contents
loading

Related Manuals for cctv camera pros JPEG2000

Summary of Contents for cctv camera pros JPEG2000

  • Page 1: Table Of Contents

    JPEG2000 Stand alone DVR User Guide CONTENTS Date: 2007/4/6 VER: 1.61 Caution ……………………………………………………………………. 3 Package ……………………………………………………………………. 3 Specification ……………………………………………………………………. 4 CHAP.1 Appearance 1-1 Front panel introduction ……………………………………………………………………. 6 1-2 Back panel introduction ……………………………………………………………………. 8 1-3 IR remote controller introduction ……………………………………………………………………. 9 CHAP.2 Installation...
  • Page 2 JPEG2000 Stand alone DVR User Guide CHAP.5 Back-up 5-1 Data backup …………………………………………………………………… 44 5-2 Backup player software installation …………………………………………………………………… 45 5-3 Backup player software interface …………………………………………………………………… 46 CHAP.6 PTZ camera control 6-1 PTZ camera installation …………………………………………………………………… 48 6-2 PTZ camera operation ……………………………………………………………………...

  • Page 3: Caution

    JPEG2000 Stand alone DVR User Guide Caution For you safety, unplug the power before moving the DVR, installing, or replacing any parts or hard drive. Make sure all the power cable and wires are properly set up before using the DVR. Contact your distributor immediately if there is any defect.

  • Page 4: Specification

    JPEG2000 Stand alone DVR User Guide Specification Model 4/8/16 CH JPEG2000 Stand Alone DVR 4/8/16CH VIDEO IN 1.0 VP-P，75OHM(BNC TYPE) Video Input Video I/O Video Output (BNC TYPE) X 2 VGA Output Support TFT LCD Monitor (Optional) Audio I/O Audio Input...
  • Page 5 JPEG2000 Stand alone DVR User Guide Record Mode Real time/ motion /alarm /schedule Search Percentage/ Time & Date /Event Shuttle Jog For Easy Search Playback Fast Forward x2, x4, x8, x16, x32, x60(NTSC) Method x2, x4, x8, x15, x25, x50(PAL)

  • Page 6: Chap.1 Appearance

    JPEG2000 Stand alone DVR User Guide CHAP.1 Appearance 1-1 Front panel introduction 1.[CD-RW] Built-in CD-RW for CD back-up. 2.[USB Port] DEVICE:Connect PC for firmware upgrade. HOST: Connect USB memory stick for backup. 3.[IR Receiver & LED Lamps] IR Remote Controller Receiver.
  • Page 7 JPEG2000 Stand alone DVR User Guide 10.[PTZ] Press [PTZ] to enter the PTZ control mode. Press the PTZ buttons to control the PTZ camera directly. 11.[+ / -] Adjust set-up value. Adjust display orders of channel. 12.[Control] SEQ/AUDIO- Press quickly for AUDIO, and press and hold for 3 seconds to enter SEQ mode.

  • Page 8: Back Panel Introduction

    JPEG2000 Stand alone DVR User Guide 1-2 Back panel introduction [4Channel] [8Channel] [16Channel] 1.[RS485, Relay Output, Sensor Input] RS485, for connection to PTZ cameras. 16 sensor inputs and 1 relay output. 2.[VGA Output] Connection to a VGA monitor or TFT LCD.

  • Page 9: Ir Remote Controller Introduction

    JPEG2000 Stand alone DVR User Guide 1-3 IR remote controller introduction 1.[MENU] Enter menu or exit 2.[Split /OSD] 4S: 4 split 9S: 9 split 16S: 16 split AUDIO: Press to play the audio, and press again to go to the next audio channel.

  • Page 10: Chap.2 Installation

    JPEG2000 Stand alone DVR User Guide CHAP.2 Installation 2-1 Camera and monitor installation 2-1-1 Camera installation Connect camera to DVR camera in CH1~CH16 ※Please do not start the DVR before the camera. installation is done. 2-1-2 Monitor and SPOT installation Monitor: Connect the MONTIOR port on the DVR back panel to the “video in”...

  • Page 11: Sensor And Alarm Installation

    JPEG2000 Stand alone DVR User Guide 2-2 Sensor and alarm installation 2-2-1 Input & Output [4Channel] [8Channel] [16Channel] 1.[D1~D16 Alarm Input/GND for Location] 16 Sensor inputs, for sensor input installation 2.[Relay Output NO/NC/COM] The application of relay output is NO+COM + NC+COM...

  • Page 12: Network And Serial Port Installation

    JPEG2000 Stand alone DVR User Guide 2-2-3 Relay output installation Alarm output can be NO or NC, depending on the settings. NO-COM: the NO and COM terminals are open-circuit, and it’ll become closed-circuit when alarm triggered. NC-COM: the NC and COM terminals are closed-circuit, and it’ll become open-circuit when alarm triggered.

  • Page 13: Ptz Camera Installation

    JPEG2000 Stand alone DVR User Guide connector description ASCII-CODE Func. CODE Func. CODE Func. CODE Func. CODE Func. CODE RIGHT MODE CH11 STOP NEXT CH12 PLAY ENTER 0X0D CH13 < J.SHU CH14 SEARCH MENU > KLOCK CH15 QPLAY CH16 DOWN...

  • Page 14: Hdd Installation

    JPEG2000 Stand alone DVR User Guide [Audio output] Connect a speaker to the audio output, DVR can play the audio during the live view and playback. 2-4 HDD installation [Steps] 1. Disassemble the bolts as illustrated. 2.Jumper setting Set up the HDD as MASTER or SLAVE. Please refer to the HDD manual of the jumper settings.

  • Page 15: Power Plugging

    JPEG2000 Stand alone DVR User Guide 2-5 Power plugging Insert the adapter to the rear power socket of DVR. Insert the power cable to the other side of adapter. Plug in the power cable and power on the DVR. Caution: Please use a 100~240VAC 50~60HZ and 12VDC 8A or 5A power supply or it may damage the DVR.

  • Page 16: Chap.3 Operation

    JPEG2000 Stand alone DVR User Guide CHAP.3 Operation 3-1 Display configuration 1.[Time] Current system time or the recorded time in playback 2.[Date] Current system date or the recorded date in playback 3.[Camera title] Camera title of the displayed channel. Camera title can be modified in [SYSTEM MENU] [CONFIGURATION] [CAMERA SETUP] [CAMERA TITLE].

  • Page 17: Screen Switch

    JPEG2000 Stand alone DVR User Guide 3-2 Screen switch Press the number button to switch to the corresponding channel for its full screen view Mode: press to switch among different split modes: 4/6/8/9/13/16 splits. +/-: button to adjust the order 3-3 PIP view In full screen mode, press “PIP”...

  • Page 18: View In Sequence

    JPEG2000 Stand alone DVR User Guide 3-4-2 Freeze in Full mode In full screen mode, Press FREEZE to freeze the channel, and press FREEZE again to cancel. 3-5 View in sequence Sequence is only functional in full screen. Keep pressing SEQ for 2~3 seconds and enter sequence mode, keep pressing SEQ for 2~3 seconds again to cancel it.

  • Page 19: Zoom View

    JPEG2000 Stand alone DVR User Guide 3-6 Zoom view Go to the channel to be zoomed and press ZOOM to enlarge to 200%, use direction buttons to move the enlarged part. Use the direction buttons to choose an area and press ENTER to zoom. Press ZOOM again to cancel 3-7 Key lock After pressing “K.

  • Page 20: Record

    JPEG2000 Stand alone DVR User Guide 3-9 Record Emergency record (Red): press REC to start emgergency record at continuous record mode and at the best resolution and quality. Schedule record (Green): record at the setup schedule, record mode, resolution and quality Stop record (White): the white dot shows up when the record schedule is set to “not record”...

  • Page 21: Playback

    JPEG2000 Stand alone DVR User Guide 3-10 Playback 3-10-1 Play/Stop Press PLAY key on front panel to start playback starting from the last playback time. Press“ PLAY ”during playback to choose to play forward or backward. Press“ STOP ”key to stop playback.
  • Page 22 JPEG2000 Stand alone DVR User Guide 3-10-4 SEARCH BAR Using Jog-shuttle or +/- keys to select the recording percentage of the search bar. Press “ ENTER ”key to confirm and start the playback. 3-10-5 TIME/DATE 1.[START] The start time and date of recording It shows that the start time and date of the recording data.
  • Page 23 JPEG2000 Stand alone DVR User Guide 3-10-7 Playback speed adjustments While playback, using the direction keys to adjust the playback speed. Speed up the playback Slow down the playback Rewind Play in forward direction The range of speed adjustment: 1/16X~1X, 1X~64X Press “...

  • Page 24: Chap.4 Set Up

    JPEG2000 Stand alone DVR User Guide CHAP.4 Set Up 4-1 Log-In 4-1-1 DVR LOG-IN Press MENU to login DVR system. Use CH. SELECTORS 1~0 to key in the password. Then press ENTER to confirm and enter the system. Erase the wrong password by PIP key.

  • Page 25: Display Setup

    JPEG2000 Stand alone DVR User Guide 4-2 Display setup 1.[SCREEN DISPLAY] Set up which information to be displayed at the Live and Playback mode. 2.[MONITOR SETUP] Adjust the VGA display resolution and the monitor color. 4-2-1 Screen display < LIVE >...

  • Page 26: Configuration

    JPEG2000 Stand alone DVR User Guide 4-2-2 Monitor setup 1.[VGA SETUP] Set up the VGA resolution. 2.[COLOR BAR TEST] Adjust the monitor colors by the color bar. VGA resolution setup: 1024*768/60HZ、800*600/60HZ、640*480/60HZ、 1024*768/75HZ、800*600/75HZ、640*480/75HZ Monitor colors’ adjustment by Color Bar. 4-3 Configuration 1.[HDD MANAGEMENT]...
  • Page 27 JPEG2000 Stand alone DVR User Guide 7.[BUZZER SETUP] Set the Buzzer ON or OFF at a certain condition. 8.[PASSWORD SETUP] Setup the password. 9.[SYSTEM INFORMATION] Show the system information, such as the versions of S/W and H/W, HDD model number, and CD-R model number.
  • Page 28 JPEG2000 Stand alone DVR User Guide 4-3-2 Time/date setup The date and time set by the manufacturer maybe different from your time zone. It is very important to set up they system date and time before the DVR starts recording. Set the date and time by using direction buttons and [-][+] button or Jog shuttle.
  • Page 29 JPEG2000 Stand alone DVR User Guide [CAMERA COLOR SETUP] Adjust the image color: Use [UP] and [DOWN] to select an item and use [-] and [+] or Jog shuttle to adjust the values. CHANNEL: Select the camera to be modified.
  • Page 30 JPEG2000 Stand alone DVR User Guide [MOTION SETUP] 1.[CHANNEL] Select a channel for the setup. 2.[SENSITIVITY GRADE] Adjust motion detection sensitivity. 1 (LOW)~4 (VERY HIGH) 3.[MOTION DISPLAY TYPE] Setup the display type that marks the motion area. BOX- shows block / CELL- shows green lattice 4.[RECORD DURATION]...
  • Page 31 JPEG2000 Stand alone DVR User Guide 4-3-4 Interval setup 1.[SWITCH INTERVAL] FULL- Full Screen Sequence Interval setup. (Range: 1~99 SEC) PIP- Picture in Picture, the sub-picture’s sequence interval setup. (Range: 1~99 SEC) 2.[EVENT RECORD] Event Update Time is to avoid the DVR from recording the event logs from the same event.
  • Page 32 JPEG2000 Stand alone DVR User Guide 4-3-6 Event popup setup 1.[CHANNEL] Use [+] and [-] to select a channel. 2.[POPUP ON/OFF] Set up the POPUP function ON/OFF: Use [+] and [-] to select ON or OFF. When there is an event, the screen display will switch to a full screen of the corresponding channel.
  • Page 33 JPEG2000 Stand alone DVR User Guide 4-3-8 Password setup The password consists of 1 to 8 digits. Press the number keys on the front panel to enter the password and you can use any combination of the numbers from 1 to 10 1.[USER ID]...

  • Page 34: Record Setup

    JPEG2000 Stand alone DVR User Guide 4-4 Record setup 1.[RECORD CONFIGURATION] Set up overwrite, recording mode, picture quality, resolution, and recording speed. 2.[SCHEDULE SETUP] Program the recording schedule. 3.[HOLIDAY SETUP] Set up holidays, max. 100 days. 4-4-1 Record configuration Use [UP] and [DOWN] to select an item. Use [+] and [-] to change the value.
  • Page 35 JPEG2000 Stand alone DVR User Guide 4.[RESOLUTION] By lowering the resolution, the DVR gains the recording speed but the recorded pictures becom smaller. Video system Full Mode Dual Mode Quad Mode NTSC 60IPS@720*240 120IPS@360*240 240IPS@360*120 50IPS@720*288 100IPS@360*288 200IPS@360*144 NTSC 120IPS@720*240...

  • Page 36: Schedule Record

    JPEG2000 Stand alone DVR User Guide 4-4-2 Schedule record Program a recording schedule throught out the week. Time Cell MODE: Press MODE to select an editing mode. Use the direction keys to move the cursor, and then press [+] and [-] to select a recording mode.

  • Page 37: Bak-Up

    JPEG2000 Stand alone DVR User Guide 4-4-3 Holiday setup Set up the holidays through out the year. You can program up to 100 days as holidays. The recording schedule of the holidays is the same as the settings of Sunday.

  • Page 38: External Device

    JPEG2000 Stand alone DVR User Guide 4-5-2 USB BACKUP 1.[HDD] Indicate the start and the end recording date and time of the HDD(s). 2.[USB] Select a starting date and time for backup. Press ENTER and use to move the cursor. Use [+] [-] or J.Shuttle to change the value.
  • Page 39 JPEG2000 Stand alone DVR User Guide 4-6-1 TCP/IP setup [IP CONFIG SETUP] 1.[MAC ADDRESS] Indicate the DVR’s MAC address. MAC address is not editable. 2.[IP ADDRESS] Set up the DVR’s IP address. 3.[IP PORT] Set up IP Port. 4.[GATEWAY] Set up GATEWAY.
  • Page 40 JPEG2000 Stand alone DVR User Guide [CONNECTION SETUP] to select and [+] [-] or J.Shuttle to change the value. 1.[TIMEOUT] Set up the remote connection response time, if the client does not receive responses from the DVR for certain duration, the client will disconnect the connection and try again.
  • Page 41 JPEG2000 Stand alone DVR User Guide 4-6-3 Pantilt setup < COMMAND SETUP > < SPEED SETUP > [COMMAND SETUP] Press to select and [+] / [-] to change the value. 1.[CHANNEL] Select PTZ channel. 2.[MODEL] Select PTZ protocol. 3.[PTZ ID] Select PTZ ID.
  • Page 42 JPEG2000 Stand alone DVR User Guide [SPEED SETUP] Press to select and [+] / [-] to change the value. 1.[PAN SPEED] Set the PANing speed. 2.[TILT SPEED] Set the TILTing speed. 3.[ZOOM SPEED] Set the speed of ZOOM IN/OUT. 4.[FOCUS SPEED] Set the speed of FOCUS NEAR/FAR.

  • Page 43: Factory Default

    JPEG2000 Stand alone DVR User Guide 4-7 Factory default Press to select and ENTER to turn ON and OFF the selection. Move the cursor to RUN and press ENTER to execute the Factory Default. 1.[ALL] Set all the settings back to factory default.

  • Page 44: Chap.5 Back-Up

    JPEG2000 Stand alone DVR User Guide CHAP.5 Back-up 5-1 Data backup ※After enter BACK UP, it takes 1 minute to load up data, please wait. ※The DVR supports CDRW or DVDRW backup.It only reads CD-R, CD-RW, and DVD+R disc Note: DVD-R, DVD+RW and DVD-RW are not readable.

  • Page 45: Backup Player Software Installation

    JPEG2000 Stand alone DVR User Guide 5-2 Backup Player software installation 1.Insert software CD. 2. Click [Install backup player] to start the installation. 3. Select a Destination Folder 4. Copy files to the Destination Folder. System will build a new icon of [CD BACKUP PLAYER] on PC [DESKTOP].

  • Page 46: Backup Player Software Interface

    JPEG2000 Stand alone DVR User Guide 5-3 Backup Player software interface 1.Display screen: To display the backup image 2.Time display: To indicate the current time 3.Information window: To indicate the CD’s start/end time and date, and the backup video quality (resolution).
  • Page 47 JPEG2000 Stand alone DVR User Guide Open AJP file 1. Select (OPEN) and the window below will show up on the screen. 2. Select the file and click [OPEN] to open the AJP file. Save JPG file 1. During playback and under FULL SCREEN MODE, when you see the picture you want to save, click EDIT.

  • Page 48: Chap.6 Ptz Camera Control

    JPEG2000 Stand alone DVR User Guide CHAP.6 PTZ camera control 6-1 PTZ camera Installation 6-1-1 Connection Setup Connect the PTZ’s D+ to the DVR’s D+, and D- to D-. 6-1-2 PTZ setup Each PTZ manufacturer may have different transmission buad rate. Please refer to the PTZ manuals for the detail information.

  • Page 49: Ptz Camera Operation

    JPEG2000 Stand alone DVR User Guide 6-2 PTZ camera operation Use MENU and NEXT key to select a PTZ command, and [+] [-] to select the channel. Then, press PTZ key to enter the PTZ control mode. Indicate the channel connected with a PTZ camera.

  • Page 50: Chap.7 Network & Remote Software 7-1 Network Configuration

    JPEG2000 Stand alone DVR User Guide CHAP.7 Network and client software 7-1 Network Introduction Users have to indentify what kind of Internet access they have before they set up the DVR’s network parameters. DSL and cable modem are the most popular broadband technologies.
  • Page 51 JPEG2000 Stand alone DVR User Guide 7-2-2 Via ADSL First, identiry if you have Static IP or Dynamic IP service. If you do not know, ask your ISP (Internet Service Provider). If you have Static IP, your ISP should provide you a static IP address, which will never change even when you reboot your modem.
  • Page 52 JPEG2000 Stand alone DVR User Guide [Via ADSL with Dynamic IP] If you have ADSL with Dynamic IP address, the network administrator assigns you an IP address from their pool when you or your ISP reboots the network and you may get a different IP address from time to time.

  • Page 53: Router Setup

    JPEG2000 Stand alone DVR User Guide 7-3 Router setup There is a wide selection of routers in the market. They may be very different in terms of configuration and operation. Here is an example of how to set up a router. For details, please read your router’s manual.
  • Page 54 JPEG2000 Stand alone DVR User Guide [PPPoE setup] Select PPPoE in WAN connection Type Enter User Name and Passward provided by your ISP The router will get the IP address upon connection. In this example, we get the IP address of 211.20.82.39.

  • Page 55: Client Software

    JPEG2000 Stand alone DVR User Guide 7-4 Client software 7-4-1 Install and setup Insert the Install CD into CD-ROM, and the computer will auto-run the Install program. We suggest installing the software on Windows XP or Windows 2000. 1.[Install Client software] Click [Install Client software].
  • Page 56 JPEG2000 Stand alone DVR User Guide 7-4-3 Software operation [Remote viewer interface] 1.[Live Display] Remote DVR Live display 2.[Current Status ] To show the current status 3.[PTZ Camera Control ] To control PTZ Camera Zoom/Focus/Direction ※ Remote Control of PTZ:...
  • Page 57 JPEG2000 Stand alone DVR User Guide 7-4-4 Client software setup [IP/PORT] 1.DVR NAME] Enter the DVR’s location or name 2.[IP LIST] Show the list of saved DVR IP addresses. If you are connecting to a DVR in this list, you can simply click it from the list, enter the DVR Admin’s password, and...
  • Page 58 JPEG2000 Stand alone DVR User Guide [DDNS] 1.[Group] Enter Group name registered on DDNS Server. Please refer to 7-5 DDNS setup and operation for details. 2.[DVR Name] Enter DVR name registered on DDNS Server. If the DVR name is entered and saved before, click LOAD to browse the list.
  • Page 59 JPEG2000 Stand alone DVR User Guide [PTZ/SAVE] 1.[Circular Monitoring Interval] Set up a sequential switch interval. 2.[Scan Rate] Select a Fast forward (FF) speed of remote Playback. 3.[PTZ Type] Select the protocol used by your PTZ camera. 4.[PTZ Baudrate] Select a PTZ camera buad rate.
  • Page 60 JPEG2000 Stand alone DVR User Guide 7-4-6 Remote playback When the DVR is connected, click [PLAYBACK] to enter Playback interface. [Remote Playback Interface] 1.[Playback Picture] To show the playback video 2.[Time/Date Selection] To select time/date of playback 3.[Record and Playback Status] START –...
  • Page 61 JPEG2000 Stand alone DVR User Guide [Search button] 1. Fast Reward (RW) 2. Fast Forward (FF) 3. RW (Speed 1X) 4. Stop / Pause 5. Playback (Speed 1X) 6. Go to the beginning of recording 7. Jump to the previous hour 8.
  • Page 62 JPEG2000 Stand alone DVR User Guide 7-4-7 Back up via Client software Save the recorded data as single JPEG picture or AVI format. [Save the recorded data as single JPEG picture] Press “STOP” right before where you want to save and press “SAVE”.

  • Page 63: Ddns Setup And Operation

    JPEG2000 Stand alone DVR User Guide 7-5 DDNS setup and operation 7-5-1 DDNS SERVER setup 1. Connect to DDNS SERVER(http://www.j2kdvr.com or http://59.124.143.151) by IE browser Select [REGISTER] to register a new account 2. Add a new account Group: Add a new user name...
  • Page 64 JPEG2000 Stand alone DVR User Guide 4. Select “ADD DVR” to add DVR information 5. Add DVR information: DVR NAME: Set a DVR name MAC ADDRESS: Enter the DVR’s MAC address. DVR’s MAC address can be found in DVR’s [SYSTEM MENU] [EXTERNAL DEVICE] [TCP/IP SETUP] [IP CONFIG SETUP] IP: Enter the DVR’s current IP address...
  • Page 65 JPEG2000 Stand alone DVR User Guide 7-5-2 DVR setup 1. The DVR setup is a onetime effort. First, make sure your DVR can be accessed over the Internet. Please refer to 7-2 Network installation and setup for details. 2. Go to [SYSTEM MENU] [ [EXTERNAL DEVICE] [TCP/IP SETUP] [DDNS SETUP] DDNS ON/OFF: Press ENTER to turn ON the DDNS service.
  • Page 66 JPEG2000 Stand alone DVR User Guide 2. Select DDNS in [IP/PORT] setup 3.Go to DDNS setup [DDNS INFO] GROUP: Enter Group nameregistered on DDNS Server. DVR NAME: Enter DVR name registered on DDNS Server. If the DVR name is entered and saved before, click LOAD to browse the list.
  • Page 67 JPEG2000 Stand alone DVR User Guide 7-5-4 Configuration of DDNS connection 1. DVR connect to DDNS server automatically and update the IP address by itself. 2. The client accessesto DDNS server and requests IP address from DDNS server. 3. DDNS server replies the DVR’s IP address and port number.
  • Page 68 JPEG2000 Stand alone DVR User Guide Users can also access to the DVR from Internet Explore for remote viewing, remote backup, and playback the backup file. Log on to DDNS server and go to the DVR List 7-5-5 Remote Live View via IE Browser Click WEB to link to your DVR 1.[Live picture]...
  • Page 69 JPEG2000 Stand alone DVR User Guide PTZ: Select the protocol BAUDRATE: Select the baud rate CH: Select the ID of PEZ camera ZOOM: Zoom in/out FOCUS: Focus near/far IRIS: IRIS open/close 7-5-6 Web Network Backup Click “Backup” to open the web page “Web Network Backup”...
  • Page 70 JPEG2000 Stand alone DVR User Guide 2. Function setup: Connect Test: To test the connection status Unlock: To get the record start/End time of DVR Set Backup Time: Set the start/end time, size and path of file backup Start Backup: Active the backup function 3.
  • Page 71 JPEG2000 Stand alone DVR User Guide 7-5-8 Web backup player Click [Backup Player] to open the web page of “Backup Player” 1. Display the backup image 2. Indicate the present time of monitoring 3. Indicate the start/end time of backup file 4.
  • Page 72 JPEG2000 Stand alone DVR User Guide 8. Function keys: OPEN: Open the backup file EDIT: Edit the backup image AVI SAVE: To save the AVI file EXIT: Log out the program 9. audio options: ON: To start the audio function...

  • Page 73: Appendix.1 Record Time Table

    JPEG2000 Stand alone DVR User Guide Appendix.1 Record time table [4ch DVR] ※The numbers are for reference only. ※The recording duration is caculated under the continuous recording mode (Record speed :1/1X ,No record audio) - 73 -...
  • Page 74 JPEG2000 Stand alone DVR User Guide [8/16ch DVR] ※The numbers are for reference only. ※The recording duration is caculated under the continuous recording mode (Record speed :1/1X ,No record audi) - 74 -...

  • Page 75: System Configuration

    JPEG2000 Stand alone DVR User Guide Appendix.2 System configuration - 75 -...

  • Page 76: Firmware Upgrade

    JPEG2000 Stand alone DVR User Guide Appendix.3 Firmware upgrade Install USB driver 1. Connect USB port between PC and DVR 2. Press and hold Search and Play keys on front panel and power on DVR 3. The DVR beeps for a moment.
  • Page 77 JPEG2000 Stand alone DVR User Guide 7. Start to copy the driver to Windows system. 8. After installation, the USB device [BulkUsb.Sys Usb Bulk I/O Driver] can be found from [Device Manager]. - 77 -...
  • Page 78 JPEG2000 Stand alone DVR User Guide Install USB upgrade program Insert the Install CD 1.Please select :[Install USB upgrade program(Allupdate) Set up Directory (default Directory ※ "C:\Program Files\J2000\Allupdate\") After installation, there’ll be a shortcut on desktop. Click on it for remote viewing.

  • Page 79: Upgrade Firmware

    JPEG2000 Stand alone DVR User Guide Upgrade firmware Update procedures Start to update Start Step 1 update BOOT Update Boot Step 2 update F/W Update F/W Finish the update procedures Finish Step 1、Update BOOT 1. Connect the USB port between DVR and PC.
  • Page 80 JPEG2000 Stand alone DVR User Guide Step 2、Update F/W 1. Select ALLUPDATE then choose the file: _ALLUPDATE_4J_NTIC_noboot_V1.3.bin 2. Press and hold SEARCH and PLAY and power on the DVR 3. When the DVR is turned on, you will hear very short beeps. Keep holding the “SEARCH” and “PLAY” buttons.

  • Page 81: Play Only Mode

    JPEG2000 Stand alone DVR User Guide Appendix.4 Play only mode Introduction PLAY ONLY MODE can be used in the following situations: When you need to playback a hard drive from another DVR When you need to playback the video which you deleted by running HDD CLEAR Enter “PLAY ONLY MODE...

Table of Contents