cctv camera pros iDVR-PRO4A User Manual page 38

System Setting
POS/ATM
\ \
You can change the settings required to interlock the POS/ATM device connected to DVR.
From <SYSTEM SETUP> - <DISPLAY>, select <POS/
1.
ATM>.
Use the mouse to change the POS/ATM settings.
2.
DISPLAY MODE : You can select the screen where
i
the data entered from POS/ATM are displayed.
OFF : Nothing is displayed on screen.
-
BOTH : Both LIVE and PLAYBACK screens are
-
displayed.
LIVE : The POS/ATM data are displayed on the
-
LIVE screen.
PLAYBACK : The POS/ATM data are displayed
-
on the PLAYBACK screen.
POSITION : Select LEFT or RIGHT for the screen position.
i
FONT SIZE : Select SMALL, MEDIUM or LARGE for your desired font size.
i
The font size is applied to a single split screen only.

FONT COLOR : Select WHITE, GRAY, YELLOW, BLUE, GREEN or RED for your desired font color.
i
DWELL TIME : You can set how long the data is displayed on screen.
i
UNTIL NEXT : Keep the data displayed on screen until the next data are input.
-
1~60SEC : The data are displayed for the specified time.
-
SCROLL TYPE : Set the scroll type for screen.
i
CLEAR : Display the screen without scrolling.
-
ROLL UP : Display the screen with roll-up type scrolling.
-
HIGHLIGHT TEXT : Select whether to activate the highlighted text or not before entering the text and specifying
i
its color.
EXCLUDE TEXT : Select whether to activate the excluded text or not before entering the text.
i
The POS data are displayed only in 1-, 4-, 6-, and 8- split screen.

To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, click <CLOSE> in the lower screen.
4.
The confirmation message appears and you will return to the previous menu.
38
|
System Setting