Network Status; Network Map - cctv camera pros iDVR-PRO4A User Manual

System Setting

Network Status

\ \
From the network map screen, you can check the internet connection status and camera connection status, and check
also the details of the connection status for each camera.
From <SYSTEM SETUP> - <NETWORK>, select <NETWORK STATUS>.
1.
Use the mouse to select one between <NETWORK MAP> and <DETAIL STATUS>.
2.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
3.
previous menu.

Network Map

IP ADDRESS : Indicates the internal IP address of
i
the DVR.
MAC ADDRESS : Indicates the internal MAC
i
address of the DVR.
DDNS ADDRESS : Indicates the internal DDNS
i
address of the DVR.
RTSP SERVICE PORT : Indicates the network port
i
of the video service.
For remote service, the router must have set up
the port forwarding.
WEB SERVICE PORT : Indicates the web service
i
network port.
For the remote service to be enabled, the corresponding port of the router should have set up the port forwarding.
UPDATE DDNS STATUS : Shows if the DDNS address was registered to the DDNS server normally. Press
i
< > to try to register the DDNS address forcibly.
EXTERNAL IP ADDRESS : Indicate the IP address for the Internet, accessible from the DVR.
i
The DVR can be granted access with the web browser at "http://<External IP Address>:<Web Service Port>".
The IP address can vary in a dynamic IP environment.
CONNECTED CLIENTS : Shows the list of clients that are currently connected.
i
Press < > to terminate the connection of an unwanted client forcibly.
Termination is limited to only users in a lower group than the current user.

44
|
System Setting