cctv camera pros iDVR-PRO4A User Manual page 35

Monitor
\ \
If you change from monitoring mode to sequence, you will have to set the interval of the sequence.
From <SYSTEM SETUP> - <DISPLAY>, select
1.
<MONITOR>.
Use the mouse to set the dwell for Sequence mode
2.
and SPOT Out dwell.
SEQUENCE DWELL : Sets the time interval to
i
the next screen mode for Live monitoring, which
defines individual screen mode
Sequence. (Can set to 1 sec ~ 60 sec)
SPOT DWELL : Sets the time interval to the next
i
view type, which defines individual view type
dwell time for SPOT OUT. (Can set to 1 sec ~ 60
sec)
DISPLAY RESOLUTION : The resolution of the display screen is set by setting the monitor resolution.
i
AUTO : Automatically selects the maximum resolution supported by the connected monitor.
-
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, click <CLOSE> in the lower screen.
4.
The confirmation message appears and you will return to the previous menu.
Sequence
\ \
Select a split mode for the sequence, and also select a list of active items when the sequence is performed.
From <SYSTEM SETUP> - <DISPLAY>, select
1.
<SEQUENCE>.
Use the mouse to add a sequence or change the
2.
settings of the existing sequence.
ACTIVATION : Select a list that you want to activate
i
the sequence for. Only one list will become active.
ADD : add a sequence.
i
To apply the change, click <APPLY> in the bottom of
3.
the screen.
When done, click <CLOSE> in the lower screen. The
4.
confirmation message appears and you will return to the previous menu.
s dwell time in the
'
s
'
35
|
English