cctv camera pros iDVR-PRO4A User Manual page 50

System Setting
POS/ATM
\ \
You can check the configuration of the POS/ATM device connected to DVR.
From <SYSTEM SETUP> - <SYSTEM>, select
1.
<POS/ATM>.
Use the mouse to check the POS/ATM settings.
2.
ACTION : Specify whether to activate the POS/
i
ATM device or not.
TYPE : Display the type for each channel.
i
PORT : Display the port for each channel.
i
Change the data for each required item, and then
3.
press the <OK> button.
To apply the change, click <APPLY> in the bottom of
4.
the screen.
When done, click <CLOSE> in the lower screen.
5.
The confirmation message appears and you will return to the previous menu.
To set the POS
Press the <EDIT> button to change in each channel.
1.
PORT : You can change the linked port by
i
pressing the <EDIT> button on the right.
The USB to serial device is required to add a port.

PROTOCOL : GENERAL is designated for
i
PROTOCOL by default.
BAUDRATE : Select the BAUD RATE between
i
2400~115200.
DATA BIT : You can select between 5 and 8 for
i
DATA BIT.
CHARACTER SET : The ASCII CHARACTER SET
i
is designated by default.
PARITY : You can select NONE, ODD or EVEN for PARITY BIT.
i
STOP BIT : You can select 1 or 2 for STOP BIT.
i
TRANSACTION START : Enter the value for TRANSACTION START by using the virtual keyboard.
i
TRANSACTION END : Enter the value for TRANSACTION END by using the virtual keyboard.
i
LINE DELIMITER : Enter the value for LINE DELIMITER by using the virtual keyboard.
i
IGNORE STRING : Enter the string to ignore by using the virtual keyboard.
i
COPY SETTINGS TO : You can copy the settings to each channel.
i
TEST : You can test the settings through the POS.
i
Complete editing and click <OK> to close the edit window.
2.
50
|
System Setting