cctv camera pros iDVR-PRO4A User Manual page 43

DDNS
\ \
You can configure the DDNS settings so that remote users who are connected to the network can access remotely.
DDNS is an IP redirection service in a dynamic IP environment that redirects (maps) the new IP address to a registered domain name

each time the IP address is changed.
From <SYSTEM SETUP> - <NETWORK>, select
1.
<DDNS>.
Use the mouse to specify the use of DDNS and
2.
select a server.
DDNS : Specify the use of DDNS connection.
i
DDNS SERVER : Select a server to connect to.
i
DVR NAME : Enter the name of the DVR that you
i
want to use as DDNS.
DDNS REGISTRATION TEST : Check if the
i
<DVR NAME> can be set as DDNS. If there is a
duplicate name in the server, the registration will
fail. If this is the case, rename the <DVR NAME>
and press Test to check if it works properly.
USER NAME : Use this field only if you set DDNS server to dyndns.org.
i
PASSWORD : Use this field only if you set DDNS server to dyndns.org.
i
DVR ADDRESS : Provide the <DVR NAME> and press the <DDNS REGISTRATION TEST> button. The name
i
will be added automatically.
DDNS CONNECTION TEST : Perform the connection test to check if DDNS is normally registered.
i
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
4.
previous menu.
Email
\ \
You can register and test an email address so that an email notification is delivered at a specific interval or if an event occurs.
From <SYSTEM SETUP> - <NETWORK>, select
1.
<EMAIL>.
Use the mouse to specify the use of email and select
2.
a server.
SERVER : Set up the mail server.
i
Set the mail server that will be used for notification
to the DVR.
Use the virtual keyboard to enter your mail server.
PORT : Enter the mail server port.
i
SECURITY : If it is set to <ON>, the email will be
i
transferred in secure mode.
If it is set to <OFF>, the email will be transferred to
a server that does not support SSL.
USER : Provide the email account (ID) of the sender.
i
PASSWORD : Provide the password of the sender.
i
TEST EMAIL ADDRESS : Enter an email address for the test purpose.
i
TEST : Send a test email and check if the test email is delivered normally.
i
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
4.
previous menu.
43
|
English