System Setting
You can configure the settings of date/time, system information, control device and POS/ATM.
Date/Time
\ \
Specify the current date and time.
From <SYSTEM SETUP> - <SYSTEM>, select
1.
<DATE/TIME>.
Use the mouse to change the time or set the options
2.
as necessary.
DATE/TIME : Set the current time and date.
i
Click<
> to adjust the time manually.
DATE FORMAT : specify the date format.
i
TIME FORMAT : specify the time format.
i
TIME SERVER : obtain the current time from the
i
time server. Click <
AUTO TIME SYNC : automatically synchronize the
i
time with the time server at a specific time.
SYNC AT : Set the time to sync with the time
i
server.
TIMEZONE : specify the GMT standard time for
i
your local area.
DST : You can set up or release the DST (Daylight
i
Saving Time).
Both <TIME SERVER> and <TIME SYNC> will be
enabled only if the DVR is connected to the Internet.
To apply the change, click <APPLY> in the bottom of
3.
the screen.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
4.
previous menu.
> to get the current time.
45
|
English