Disk Operations - cctv camera pros iDVR-PRO4A User Manual

System Setting

Disk Operations

\ \
You can set to delete the recording automatically and set the overwrite options, and you can also format the HDD
recording data.
From <SYSTEM SETUP> - <STORAGE>, select
1.
<DISK OPERATIONS>.
Use the mouse to set the operation conditions of the
2.
disk.
DISK WRITE MODE
i
If it is set to <OVERWRITE>, the existing data
-
will be overwritten by new recording data if the
recording data size exceeds the free space of
the HDD.
If the option is set to <ONCE> and the HDD is
-
full, the DVR will stop recording and output the
beep or alarm that is pre-defined at <EVENT>.
RECORDING TIME LIMIT : The recorded data is stored for the designated period by selecting the <HOUR>,
i
<DAY>, <WEEK>, etc., and then deleted after the specified period. If it is set to <OFF>, this function will be
disabled. (You can save the recorded data for a maximum of 3 months.)
Ex) Record Time Limit : 1 day Even if there is sufficient free space in the HDD, it records / keeps videos of the most recent 1 day only.

DISK FORMAT : format the hard disk.
i
Note that formatting the HDD will delete all video data and logs.
J
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
4.
previous menu.
S.M.A.R.T settings
\ \
You can check the S.M.A.R.T information of the disk and specify the check frequency.
What is S.M.A.R.T information?

S.M.A.R.T (Self-Monitoring, Analysis and Report Technology) is to detect a HDD that is likely to cause a problem in the future with a
warning message.
From <SYSTEM SETUP> - <STORAGE>, select
1.
<S.M.A.R.T. SETUP>.
Use the mouse to check the S.M.A.R.T operation and
2.
specify the check interval.
S.M.A.R.T STATUS : Read the S.M.A.R.T
i
information of the disk and check to display if the
current disk is in normal operation.
Click <DETAIL INFO> to view the details.
52
|
System Setting