cctv camera pros iDVR-PRO4A User Manual page 31

Motion Sensor
\ \
Set the motion sensor of the camera so that it can detect a motion event.
From <SYSTEM SETUP> - <CAMERA>, select
1.
<MOTION SENSOR>.
Use the mouse to specify the use of each option
2.
item.
ACTIVATION : turn on or off the motion sensor.
i
MARK : Set to <ON> to display the motion
i
detection indicator on each video tile where
applicable.
SENSITIVITY : Set the sensitivity level of the
i
motion sensor to either Daytime or Nighttime.
EDIT AREA : Specify the motion detection area.
i
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, click <CLOSE> in the lower screen. The confirmation message appears and you will return to the
4.
previous menu.
The motion detection sensitivity may differ depending on the characteristics of the connected camera or the installation environment.
J
Motion Area Setup
From the motion setup window, click <EDIT AREA> in the right corner to display the area setup screen.
Setting the motion area may differ depending on the camera model. Below is a typical setting of the motion area.
Click <EDIT AREA> to move to the motion area
1.
setup screen.
Press and hold the left mouse button and drag to
2.
select/deselect your desired area.
31
|
English