Honda 08E91-E22-100A Installation Instructions Manual page 9

28. Wrap one urethane tape around the vehicle 5-pin
connector, and tuck it into the area shown.
2
Push.
Push.
1
Lock connector
29. Disconnect the turn signal switch 12-pin connector,
and plug it into the engine starter harness 12-pin
connector. Plug the remaining engine starter
harness 12-pin connector into the turn signal switch.
TURN SIGNAL
SWITCH 12-PIN
CONNECTOR
BODY
SWITCH
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE 5-PIN
URETHANE
CONNECTOR
TAPE
VEHICLE
BRACKET
VEHICLE 5-PIN
CONNECTOR
12-PIN CONNECTORS
8-PIN
CONNECTORS
ENGINE STARTER
HARNESS
30. Disconnect the wiper switch 8-pin connector and
plug it into the engine starter harness 8-pin
connector. Plug the remaining engine starter
harness 8-pin connector into the wiper switch.
BODY
SWITCH
31. Secure the engine starter harness to the vehicle
harness using two wire ties. Do not secure it to the
SRS harness.
6D1813AY
6D18141Y
AII 35365 (0708)
2 8-PIN CONNECTORS
ENGINE STARTER
HARNESS
VEHICLE
HARNESS
WIRE TIES
WIPER SWITCH
8-PIN
CONNECTOR
6D18151Y
ENGINE
STARTER
HARNESS
6D1816BY
9 of 24