Honda 08E91-E22-100A Installation Instructions Manual page 15

50. Using two pairs of needle nose pliers, bend the
antenna plate according to the dimensions shown.
ANTENNA
10 mm
10 mm
PLATE
SCALE
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
51. Starting near the antenna end of the cable, wrap
NEEDLE NOSE
PLIER
52. Using scissors, cut one foam cushion in half. Wrap
721509BY
AII 35365 (0708)
three foam cushions around the antenna cable at the
measurements shown.
ANTENNA
CABLE
URETHANE
TAPE
ANTENNA CABLE
Cut.
URETHANE TAPE
USE 1/2 URETHANE
the two halves of the foam cushion around the
antenna cable at the measurements shown.
390 mm
20 mm
20 mm
620 mm
7111110Y
15 of 24