Honda 08E91-T2A-100 Installation Instructions Manual

Honda 08E91-T2A-100 Installation Instructions Manual

For honda 2015 cr-v

Advertisement

INSTRUCTIONS

PARTS LIST

Remote Control Engine Starter Unit Kit
P/N 08E91-T2A-100
Transmitter
Control unit
Antenna
ID label
Remote Control Engine Starter Attachment Kit
P/N 08E92-T0A-100C
Control unit bracket
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
REMOTE CONTROL
ENGINE STARTER
3
21 Wire ties
2
6
Clip
Caution label
Fuse label
Accessory User's Information Manual
AII 00273 (1410)
Application
2015 CR-V
Relays
(Some may not used)
Long wire ties
Urethane tapes
Publications No.
VERSION 2
Issue Date
OCT 2014
1 of 35
08E92-T0A-1C01-90

Advertisement

loading

  Related Manuals for Honda 08E91-T2A-100

  Summary of Contents for Honda 08E91-T2A-100

  • Page 1 Remote Control Engine Starter Attachment Kit P/N 08E92-T0A-100C Caution label Control unit bracket Fuse label Engine starter harness Accessory User’s Information Manual 1 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410) 08E92-T0A-1C01-90...
  • Page 2 “Search”. Or, call 888-424-6857. 20A FUSES • Trim Tool Set (T/N SOJATP2014) • Plastic Trim Tool (T/N SILTRIMTL10) 3 RELAYS ENGINE 3A FUSES STARTER QD90201AG HARNESS 2 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 3 Clean with isopropyl alcohol. ROOF CONSOLE QB20939DH SUNGLASS HOLDER RIGHT (Open.) LENS 4 SCREWS LEFT LENS 4 RETAINING TABS 4 RETAINING Q0N2012AG TABS 3 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 4 A-PILLAR TRIM (Remove.) VEHICLE CLIP PANEL DRIVER’S A-PILLAR TRIM DRIVER’S A-PILLAR TRIM DRIVER’S Q0N2016AG DOOR OPENING SEAL (Pull away.) 2 CLIPS DRIVER’S A-PILLAR Q0N2014AG 4 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 5 Remove the driver’s A-pillar trim. Install the new clip (supplied) to the driver’s A-pillar trim. NEW CLIP DRIVER’S A-PILLAR TRIM (inside) RETAIN- SELF-TAPPING SCREW CLIP Q0N2020BG Q0N2018AG 5 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 6 DRIVER’S DASH- BOARD LOWER COVER LOCK 8 CLIPS QAN2325AD PLASTIC TRIM TOOL Q0N2024BG 18. Using a plastic trim tool, release the lock as shown. 6 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 7 20. Secure the upper column cover to the meter panel with the tape. 2 RETAINING METER PANEL TABS TAPE LOWER COLUMN COVER SELF-TAP- PING SCREW Q0N2028AG UPPER COLUMN COVER Q0N2026AG 7 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 8 (Cut in half.) URETHANE TAPE QB62501BK (Do not fold the antenna cable.) DRIVER’S DOOR OPENING SEAL (Pull away.) 2 CLIPS DRIVER’S KICK Q0N2030AG PANEL 8 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 9 VIEW 2 URETHANE URETHANE TAPE TAPES QD90203AG (Cut in half.) 27. Wrap two halves of urethane tape around the antenna cable as shown. 9 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 10 QD90204AG (Cut in half.) ADHESIVE BACKING 30. Wrap three halves of urethane tape around the antenna cable at the measurements shown. ANTENNA QB51401CH 10 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 11 DRIVER’S A-PILLAR QD22004AY 35. Secure the antenna cable to the vehicle harness with ADHESIVE five wire ties. MASKING TAPE BACKING (Remove.) (Remove.) QB51405CH 11 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 12 37. Secure the antenna cable to the vehicle frame with PANEL PANEL SEAL one wire tie. (Pull away.) ANTENNA VEHICLE CABLE FRAME WIRE TIE QD90205AG ANTENNA CABLE QD90210AG 12 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 13 43. Route the engine starter harness 28-pin connectors as shown, and plug the engine starter harness 28-pin connector into the vehicle 28-pin connector. 13 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 14 45. Plug the vehicle 28-pin connector into the engine starter harness 28-pin connector. QD90209AG 47. Secure the engine starter harness to the vehicle harness with one wire tie. 14 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 15 URETHANE SIDE VIEW QD90211AG QD62415AB 49. Using scissors, cut one urethane tape into three pieces, and attach them to the left knee bolster as shown. 15 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 16 NOTE: Check that the engine starter harness 5-pin connector is securely connected to the fuse box 5-pin connector. A loose connection can cause the engine to stall. QD90214AG 16 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 17 FOG LIGHTS ENGINE STARTER QD90216AG 4-PIN HARNESS 4-PIN CONNECTOR CONNECTOR QD90215AG 57. Plug the remaining engine starter harness 4-pin connector into the fuse box. 17 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 18 60. Slide the clip from the engine starter harness 28-pin connector onto the bottom of the fuse box, then plug the remaining vehicle 28-pin connector into the engine starter harness 28-pin connector. 18 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 19 HARNESS QD90219AG 62. Plug the engine starter harness 28-pin connector to ENGINE the engine starter harness 28-pin connector. STARTER HARNESS 28-PIN CONNECTORS QD90220AG 19 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 20 70. Re-plug the vehicle 12-pin connector and vehicle 13-pin connector. 20 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 21 Go to step 74. ANTENNA CABLE FUSE 3 WIRE TIES QD90226AG ENGINE STARTER VEHICLE HARNESS HARNESS 21 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 22 75. Secure the engine starter harness to the hole in the left knee bolster using the clip on the engine starter harness as shown. ENGINE STARTER QD22110AY HARNESS DASHBOARD 22 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 23 CONNECTOR shown. WIPER ENGINE STARTER SWITCH HARNESS 10-PIN QD22112AY CONNECTOR 80. Plug the remaining engine starter harness 10-pin connector into the wiper switch. 23 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 24 CONNECTORS STARTER QD22113AY TIES HARNESS ENGINE STARTER HARNESS QD22114AY 83. Plug the remaining engine starter harness 12-pin connector into the combination light switch. 24 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 25 87. Loosely secure the antenna cable to the dashboard with one wire tie loosely installed in step 76. ENGINE STARTER HARNESS 2 WIRE TIES QD22115BY 25 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 26 28-pin connector into the control BLOCK unit. HOLE CONTROL UNIT ANTENNA CABLE CONNECTOR ENGINE STARTER HARNESS CLIP Q0N2308BG ENGINE STARTER HARNESS 28-PIN CONNECTOR QC50917AB 26 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 27 Torque the vehicle flange nut to in step 87. 18.6 - 24.5 N·m (14 - 18 lbf·ft). ANTENNA CABLE (Bundle up the excess.) DASHBOARD WIRE TIE QD22402AY 27 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 28 Remote Control Engine Starter (Page 31). Input the VIN and other CHECK BUTTON required information. QB32102BH Select Honda Systems, then click the check button. 28 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 29 VIN will be required to obtain the Select R/C ENG STARTER. password. (USA) Click the check button. Obtain PCM-code message. CHECK BUTTON QB32104AH CHECK BUTTON QB32106AH 29 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 30 Remote Control Engine Starter Unit has been completed. Turn the engine switch off. The registration of the Remote Control Engine Starter Unit has been completed. QB32108CH 30 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 31 Check the operation of the transmitter when the vehicle is 120 m (400 ft.) away and in direct sight. 31 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 32 Driver 1 by unlock of transmitter. Check that the engine can start by the vehicle key and that the wiper and the headlight can be operated normally. 32 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 33 33 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)
  • Page 34 34 of 35 AII 00273 (1410) © 2014 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 35 35 of 35 © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 00273 (1410)

This manual is also suitable for:

08e92-t0a-100c