Advertisement
37. Reinstall the TPMS control unit to the vehicle bracket
using the vehicle bolt removed in step 24.
VEHICLE
BRACKET
38. Route the engine starter harness along the vehicle
harness to the front of the fuse box.
WIRE TIE
FUSE BOX
(Loosely attach.)
ENGINE
STARTER
HARNESS
39. Loosely attach the engine starter harness to the
vehicle harness with one wire tie.
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE
UNIT
TPMS CONTROL
BOLT
Removed in step 24.
721503AY
VEHICLE
HARNESS
6D1820AY
40. Disconnect the vehicle 5-pin connector from the fuse
box. Plug the engine starter harness 5-pin connector
into the fuse box 5-pin connector. Wrap one
urethane tape around the vehicle 5-pin connector.
NOTE: Check that the engine starter harness 5-pin
connector is connected to the vehicle connector and
locked securely. A loose connector can cause
engine to stall.
Lock connector
2
Push.
Push.
1
2
Pull.
Push.
Unlock connector
AII 35365 (0708)
URETHANE
TAPE
5-PIN
CONNECTOR
ENGINE STARTER
HARNESS
2
Push.
1
3
Lock connector
VEHICLE
5-PIN
CONNECTOR
FUSE
BOX
VEHICLE
5-PIN
CONNECTOR
1
6D1823DY
11 of 24
Advertisement
