Honda 08E91-E22-100A Installation Instructions Manual page 18

60. Secure the antenna cable to the vehicle harness with
four wire ties.
VEHICLE
HARNESS
61. Secure the vehicle 5-pin connector disconnected in
step 40 to the vehicle harness with one wire tie.
ANTENNA
VEHICLE
CABLE
5-PIN
CONNECTOR
WIRE
TIE
VEHICLE
HARNESS
62. Secure the antenna cable to the vehicle harness with
two wire ties.
18 of 24
VEHICLE CLIP
4 WIRE TIES
ANTENNA
CABLE
WIRE TIES
63. Route the antenna cable along the engine starter
harness.
ANTENNA
CABLE
WIRE TIE
(Loosely
attached.)
WIRE TIE
6D18430Y
(Loosely
attached.)
64. Secure the antenna cable to the engine starter
harness with the four wire ties you loosely attached.
Installing the Control Unit
65. Install the control unit bracket to the control unit.
6D1844AY
AII 35365 (0708)
VEHICLE
HARNESS
WIRE TIE
ENGINE
(Loosely
STARTER
attached.)
HARNESS
CONTROL UNIT
BRACKET
CONTROL
UNIT
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
WIRE TIE
(Loosely
attached.)
6D1845BY
6D18461Y