Honda 08E91-E22-100A Installation Instructions Manual page 23

11. The following message will display: The
registration of the Remote Control Engine
Starter Unit has been completed. Click on the
check button.
"The registration of the Remote Con-
trol Engine Starter Unit has been com-
pleted"
12. The following message will display: Check that the
engine can be started by the Transmitter. Click
on the check button.
"Check that the engine can be started
by the Transmitter"
13. Perform the function test on page 24, then
disconnect the HDS.
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
CHECK BUTTON
752510AS
CHECK BUTTON
752511AS
AII 35365 (0708)
23 of 24