Oce variolink 9522 User Manual page 502

13
3
Check the job settings on the screen.
– [Next] and [Previous] keys may be displayed depending on the se-
lected application functions. Touch the keys to check the setting.
If no setting change is desired, proceed to step 6.
4
Change the settings as required.
– Touch the desired key (Basic Setting/ Output Setting/ Original Set-
ting/ Quality Adjustment/ each application function) on the Check
Screen to highlight it, then touch [Change Setting].
The touch panel will display an appropriate screen to change the
copying condition selected.
– Change the setting as desired, then press [Check] to restore the
Check Screen to return to the checking steps.
13-6
Advanced Information
VarioLink 9522