Seagull Models MINI CHRISTEN EAGLE II N54CE Assembly Manual page 12

MINI CHRISTEN EAGLE II N54CE
COWLING.
1) Slide the fiberglass cowl over the motor
and line up the back edge of the cowl with the
marks you made on the fuselage then trim and
cut as shown.
2) While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in nearly the middle of the cowl
opening. Use the spinner backplate as a guide.
Hold the cowl firmly in place using pieces of
masking tape.
12
Instruction Manual.
3) Use four M2x6mm machine screws to
secure the fiberglass cowling to thefuselage
as shown.
Machine screw M2x6mm.