Table of Contents
Advertisement
Chapter 3 Installation and Configuration
WAN side HTTP server: Default at Disabled.
FTP server: Default at Enabled.
TFTP server: Default at Disabled.
HTTP server port: Default at 80.
DMZ: Regarding the DMZ Host, it is a local computer exposed to the Internet. Therefore, an incoming
packet will be checked by NAT algorithms in the ADSL Router, then passed to the DMZ host when the
packet is not sent by hacker or not limited by the virtual server list.
DMZ HOST IP: Enter the IP address of the DMZ host.
DNS Proxy: Default at Enabled.
DHCP Relay: Default at Disabled
DHCP Target IP:
IGMP Proxy: Default at Disabled.
PPP reconnect on WAN access: Default at Disabled. Select Enabled if you want to automatically re-
establish the PPPoE/PPPoA session when disconnected by ISP.
51
Advertisement
Table of Contents
