Configuring The Network Properties - Atlantis Land Network Router User Manual

Chapter 3 Installation and Configuration
6. You will see the following screen prompting for the path of the Windows source files. Please
specify a location. Click "OK".

3.2 Configuring the Network Properties

This section describes the configuration required by LAN-attached PCs that communicate with the ADSL
Modem/Router, either to configure the device, or for network access. These PCs must have an Ethernet
interface installed properly to be connected to the ADSL Modem/Router either directly or through an
external device, hub. PC must have TCP/IP installed and configured to obtain an IP address through a
DHCP server or a fixed IP address that must be in the same subnet of the I-Fly Wireless Router ADSL .
The default IP address of the ADSL Modem/Router is 10.0.0.2 and subnet mask is 255.0.0.0. The best
and easy way is to configure the PC to get an IP address from the ADSL Modem/Router.
Please follow the steps below for PC's network environment installation. Before taking the first step,
please check your PC's network components. If your PC connects to the ADSL Modem/Router through
USB port, the TCP/IP protocol stack must be installed. If your PC connects the ADSL Modem/Router
through Ethernet port, the TCP/IP protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
19