Hardware Installation - Atlantis Land Network Router User Manual

I-Fly Wireless Router ADSL

1.5 Hardware Installation

Power on
Connect the Adapter to power inlet and turn the power switch on, this product will enter a self-test phase.
When it is in the self-test phase, the indicators READY LED will be lighted ON for about 8 seconds, and
the READY LED will be flashed to indicate that the self-test phase has finished. Finally, the READY
LED will be flashed to indicate that router is in normal operation.
ADSL connection
Simply plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the
Router and insert the other end into splitter .
Connect Router to LAN
Prepare an Ethernet cable to connect Router to Hub or Switch of your LAN. You can connect
Router to your PC directly by crossover Ethernet cable.
6