Atlantis Land Network Router User Manual page 46

I-Fly Wireless Router ADSL
Public Port: Enter the public port number you want to configure.
Private Port: Enter the private port number you want to configure.
Port Type: Select TCP if you want to scope for the connection-based application service on the remote
server using the port number. Or select UDP if you want to scope for the connectionless application
service on the remote server using the port number.
Host IP Address: Enter the IP address of certain internal server to which requests from the specified port
is forwarded.
If the DHCP server option is enabled, you have to be very careful in assigning the IP
addresses of the virtual servers in order to avoid conflicts. The easy way is that the IP address
assigned to each virtual server should not fall into the range of IP addresses that are to be
issued by the DHCP server. You configure the virtual server IP address manually, but it is still
in the same subnet with the router.
3.5.8 Configuration- Wireless
Wireless Access Point builds a wireless LAN and can let all PCsequipped with IEEE 802.11b wireless
network adaptor connect to your Intranet.
40