1. Manuals
  2. Brands
  3. THE WORLD MODELS Manuals
  4. Toy
  5. F4U CORSAIR EP
  6. Instruction manual

THE WORLD MODELS F4U CORSAIR EP Instruction Manual

Hide thumbs Also See for F4U CORSAIR EP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
4
F
Requires: 4-channel radio w/ 4 micro servos,
Wing Span
Wing Area
Flying Weight
Fuselage Length
Warning ! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of electric powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
E254XM0803
U CORSAIR EP
Outrunner Motor w/ Propeller Adaptor
20A Brushless ESC, 3 cells 11.1V
2100mAh Li-Po battery & charger.
* Specifications are subject to change without notice.*
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
Specifications
39.5 in / 1000 mm
282 sq in / 18.2 sq dm
27 oz / 760 g
31.5 in / 800 mm
INSTRUCTION MANUAL
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF)SERIES
MADE IN CHINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F4U CORSAIR EP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for THE WORLD MODELS F4U CORSAIR EP

Summary of Contents for THE WORLD MODELS F4U CORSAIR EP

  • Page 1 Operating this model without prior preparation may cause injuries. Remember, safety is the most important thing. Always keep this instruction manual at hand for quick reference. FACTORY PRE-FABRICATED The World Models ALMOST-READY-TO-FLY(ARF)SERIES Manufacturing Co., LTD. MADE IN CHINA www.theworldmodels.com...

  • Page 2: Before You Begin

    U CORSAIR EP INDEX BEFORE YOU BEGIN PARTS LIST ASSEMBLY P.3-P.9 SAFETY PRECAUTIONS BEFORE YOU BEGIN Read through the manual before you begin, so you will have an overall idea of what to do. Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT and check for defects for all parts that will require CA or Epoxy for final assembly.
  • Page 3 Parts List 1. MAIN WING -- 1 pair 8. SCREW PM3x6mm -- 4 pcs WASHER d3xD7mm -- 4 pcs 2. SERVO MOUNTING PANEL -- 1 pair FOLDING PROPELLER SET (11x5) -- 1 set SCREW PM2x14mm -- 4 pcs COWLING -- 1 pc. SCREW PA1.7x8mm -- 8 pcs SCREW PWA2x8mm -- 4 pcs STRAPER -- 2 pcs...
  • Page 4 Main Wing Apply instant type CA glue to both sides of each hinge. Aileron Servo Lead Bottom View Ø1mm pilot holes for World Models horn are pre-drilled. Aileron Servos Please look for pin-hole marks at under side of control surfaces. PM2x14mm Screw PA1.7x8mm Fuel Tube...

  • Page 5: Main Landing Gear

    Main Landing Gear PA2.3x12mm PA2.3x12mm Screw 2.6mm Collar M3x3mm Set Screw Bottom View M3x3mm Set Screw Wheel Ø40mm Bottom View Completed Stabilizer & Elevator Temporary install the main wing, adjust leveling of the (Stabilizer) stabilizer to make it as parallel to the main wing (Mai n Wi ng) B=B' as possible...

  • Page 6: Rudder Pushrod

    Vertical Fin, Rudder & Tail Landing Gear PA2x8mm Wheel Ø23mm PA2x8mm Screw Apply instant type CA glue to both sides of each hinge. Plastic Collar C=C' Bottom View Completed Rudder Pushrod Ø1mm pilot holes for World Models horn are pre-drilled. PM2x8mm Screw Please look for pin-hole marks at side of control surfaces.

  • Page 7: Elevator Pushrod

    Elevator Pushrod Ø1mm pilot holes for World Models horn are pre-drilled. PM2x8mm Screw Please look for pin-hole marks at under side of control surfaces. Fuel Tube PM2x8mm d2xD4x4mm Clevis 45mm 15mm Horn Pushrod Ø1.4x435mm Bottom View Outrunner Motor/ Cowling Optional Parts Don't over-tighten the PWA2x8mm Screw PM3 screws, too much...

  • Page 8: Radio Equipment

    Radio Equipment Install and arrange the Rudder Pushrod servos as shown in the 20A Brushless ESC Ø1.4x415mm diagram. Double-Sided Tape Receiver Elevator Pushrod Front Rudder Servo Straper Ø1.4x435mm Elevator Servo Pushrod Connector Elevator Pushrod Ø1.4x50mm Fuel Tube Sponge d2xD4x4mm Elevator Servo Bottom View KA1.7x5mm J1(Pushrod Ø1.4x50mm)
  • Page 9 Canopy PWA2x8mm Screw Pilot PWA2x8mm 1.2mm Wing Setting Adjust the wing and fuselage configuration as shown in the diagrams. A=A' B=B' C=C' D=D' E254XM0803...

  • Page 10: Control Throws

    # First time flyer should never fly by himself / herself. Assistance from experienced flyer is absolutely necessary. # Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly pre-adjusted aircraft. F4U CORSAIR EP 180W Motor System...
  • Page 11 Product Registration Form (US Customers) We would like to share with you any relevant information regarding your model, including product news and free upgrade parts when applicable. Please fill in the following and send to AirBorne Models, 4749-K, Bennett Drive, Livermore, CA 94551 USA. 1.
  • Page 12 E254XM0803...

Table of Contents