Install A Power Supply - Sun Microsystems Netra X4450 Service Manual

▼ Install a Power Supply

1. Remove the replacement power supply from its packaging, and place the
power supply on an antistatic mat.
2. Slide the power supply into bay until it is fully seated (
FIGURE 3-5
3. Reconnect the power cord to the power supply.
4. Verify that the amber indicator on the replaced power supply and that the
Service Required Indicators are not lit.
3-6 Sun Netra X4450 Server Service Manual • August 2008
Installing a Power Supply
).
FIGURE 3-5