Triumph Daytona 675 Owner's Handbook Manual page 96

Maintenance and Adjustment
Remove the cap from the expansion tank
and add coolant mixture as necessary to
bring the level up to the 'MAX' mark. Re-
install the cap.
chuk
1. Coolant expansion tank
2. Coolant expansion cap
3. Upper fluid level
4. Lower fluid level
96
Installation
Installation is the reverse of removal noting
the following.
Re-install the screws securing the fairing to
the frame and tighten to 44 lbf-in (5 Nm).
2
Re-install the screws securing the fairing
lower halves to each other and tighten to
1
27 lbf-in (3 Nm).
Tighten the frame protector screws to
80 lbf-in (9 Nm) (if equipped).
3
Re-install the screws securing the cockpit to
4
the fairing and tighten to 27 lbf-in (3 Nm).
Re-install the right hand cockpit infill panel
and tighten to 27 lbf-in (3 Nm).
Connect the battery leads, positive (red) lead
first.
Re-install the battery strap.
Re-install the rider's seat and tighten the
screws to 80 lbf-in (9 Nm).